 |  | Aligning glass panes | FS-V21R super turbo mode provides accurate detection of up to ±8° even if the glass pane is slanted. | IC and Semiconductor | Transparent Object Detection, Lustre/Glossy Detection, Presence/absence | 
FU | |  | New! Ultimate Sensor Selection Guide
New Techniques Simplify Transparent Object Detection |
 | | Automatic calculation of angles/intersections | Angles, intersections, and edge positions are instantly measured/judged based on the surface profile. | Automotive/Metal, Electrical/Electronics, Food/Packaging | Positioning, Parallelism, Depth | 
LJ-G | |  | Measurement & Application Guide
RESEARCH & DEVELOPMENT |
 | | BGA ball observation | The depth-of-field is deep, so this microscope can accurately focus on even a spherical object that conventional microscopes could not. | IC and Semiconductor | Other | 
VHX-1000 | |  | Presenting helpful hints
Enhancing quality, cost, and delivery in a variety of industries. |
 | | Cancer cell observation | The lens magnification ranges from 0x to 5000x. One digital microscope covers the observation areas of biological, metallographic, and stereoscopic microscopes. | R&D | Other |
VHX-1000 | | | Presenting helpful hints
Enhancing quality, cost, and delivery in a variety of industries. |
 |  | Checking adhesion of mold press die | A fault in die adhesion is caused by displacement of lead frame. High heat resistance performance up to 105° allows direct mounting on a device, allowing high accuracy measurement in high temperature environment. | IC and Semiconductor | Thickness, Positioning | 
EX-V | |  | KAIZEN Case Studies
Improving Processes with the Latest Measurement Devices |
 | | Checking air driver pressure relief | Influence by base pressure fluctuation is cancelled via zero-shift and the air driver pressure relief is accurately detected. | IC and Semiconductor | Suction/Vacuum Check | 
AP-V40W | |  | Digital Pressure Sensors Guide
Pneumatic device guide to solving common sensing problems. |
 | | Checking assortment/barcode printing | Checks whether barcode labels are pasted. Assortment can be also directed at the same time. | Food/Packaging | Other | 
BL-1300 | |  | BARCODE Q&A Vol.2
Just Released! Barcode Q&A Vol.2 |
 | | Checking barcode label serial numbers | The total number of barcode serial numbers mounted is checked. | Electrical/Electronics | Other |
BL-1300 | | | BARCODE Q&A Vol.2
Just Released! Barcode Q&A Vol.2 |
 | | Checking board suction | Even the pressure differences on holed board suction checks are accurately checked via AI tuning. | IC and Semiconductor | Suction/Vacuum Check |
AP-V40W | | | Digital Pressure Sensors Guide
Pneumatic device guide to solving common sensing problems. |
 | | Checking degree of vacuum in canned or sealed foods | The degree of vacuum in canned or sealed food is checked using slight dilation on a lid. The non-contact high-speed checking capability allows in-line inspection of products. | Food/Packaging | Distortion/Warpage, Level |
EX-V | | | KAIZEN Case Studies
Improving Processes with the Latest Measurement Devices |
 | | Checking depth of bearing rim orbit | The depth of the wheel orbit slot after polishing is detected by rotating a work piece and measuring the opening of a jig. | Automotive/Metal | Depth |
EX-V | | | KAIZEN Case Studies
Improving Processes with the Latest Measurement Devices |
 | | Checking dynamic accuracy of chip mounter | Dynamic accuracy of an arm is constantly monitored during equipment operation. Faulty mounting due to a displaced home position is prevented. Ultra-compact sensor head provides excellent flexibility in installation. | IC and Semiconductor, Electrical/Electronics | Vibration, Stroke |
EX-V | | | KAIZEN Case Studies
Improving Processes with the Latest Measurement Devices |
 | | Checking metallic work pieces that pass under a mist environment | All metallic work pieces are sheathed in Teflon. It is possible to accurately detect metallic work piece passing without the influences of oil. | Automotive/Metal | Passage Detection, Presence/absence | 
ES | | | New! Ultimate Sensor Selection Guide
New Techniques Simplify Transparent Object Detection |
 | | Checking paint spray | Paint coming from the nozzle is detected using the PS-202. This prevents nozzle clogging and a process error caused by paint cloth. | Construction | Passage Detection, Colour Detection, Presence/absence | 
PS01 | | | New! Ultimate Sensor Selection Guide
New Techniques Simplify Transparent Object Detection |
 | | Checking powder press ejection errors | Damage to the mold can be prevented by checking the tip of the punch each stroke. | Electrical/Electronics | Height | 
CV-5000 | |  | Handy KAIZEN Techniques
Effectively Applying Preprocessing Filters |
 | | Checking presence of bearing seal | The LK series high-accuracy CCD laser displacement sensor is used for preventing faulty assembling or process skipping errors on the sealing of bearings. By combining optional meter relays and measuring a rotating bearing, deflection of sealing is detected. The wide-spot optical system allows stable measurement without variation caused by roughness on sealing surface. | Automotive/Metal | Height, Depth | 
LK-G5000 | |  | New Expert Solution Guide 78 KAIZEN Ideas
New Edition! Latest Process Improvement Guide |
 | | Checking robotic arm position | In addition to checking halt position of a robotic arm, measurement of performance characteristics during operation can be measured at the same time. | R&D, Electrical/Electronics | Stroke, Positioning |
LK-G5000 | | | New Expert Solution Guide 78 KAIZEN Ideas
New Edition! Latest Process Improvement Guide |
 | | Checking suspension arrival | Accurate suspension detection is possible because even a curved glossy surface is detected by area. | Automotive/Metal | Passage Detection, Lustre/Glossy Detection, Presence/absence | 
LV | |  | GV Series Application Guide
Stable Detection & High-Speed Response |
 | | Checking the vehicles on the final assembly line | It is possible to check vehicle arrival at a distance of 50 m without disturbing the operator. | Automotive/Metal | Long Detection, Presence/absence |
LV | | | GV Series Application Guide
Stable Detection & High-Speed Response |
 | | Checking wafer position | Checking whether a wafer set on a table is overlapping on a fixing pin. | IC and Semiconductor | Runout, Height, Curvature |
LK-G5000 | | | New Expert Solution Guide 78 KAIZEN Ideas
New Edition! Latest Process Improvement Guide |
 | | Connector observation | The depth-of-field is deep, allowing you to accurately focus on uneven locations where conventional microscopes could not focus. | IC and Semiconductor | Other |
VHX-1000 | | | Presenting helpful hints
Enhancing quality, cost, and delivery in a variety of industries. |
 | | Controlling caulking pressure of auto parts | Caulking pressure is detected by detecting the pressure applied to the hydraulic cylinder. This prevents defective caulking flow. | Automotive/Metal | Pressure Control | 
AP-V80W | | | Digital Pressure Sensors Guide
Pneumatic device guide to solving common sensing problems. |
 | | Controlling cylinder pressure | Cylinder pressure is evaluated by detecting and monitoring each stage where the hydraulic pressure that is applied to the hydraulic cylinder is gradually increased. | Automotive/Metal | Pressure Control |
AP-V80W | | | Digital Pressure Sensors Guide
Pneumatic device guide to solving common sensing problems. |
 | | Controlling hydraulic press pressure | Hydraulic press pressure is controlled by using the digital pressure sensor AP-V80. | Automotive/Metal | Pressure Control |
AP-V80W | | | Digital Pressure Sensors Guide
Pneumatic device guide to solving common sensing problems. |
 | | Controlling hydraulic press pressure | Pressing force and molding pressure are kept constant by controlling the pressure applied to each hydraulic cylinder. | Automotive/Metal | Pressure Control |
AP-V80W | | | Digital Pressure Sensors Guide
Pneumatic device guide to solving common sensing problems. |
 | | Controlling liquid levels for ABS oil | Liquid levels for ABS oil in a tank is measured. It is possible to accurately detect even high-viscosity oils. | Automotive/Metal | Level | 
FS-N | | | New! Ultimate Sensor Selection Guide
New Techniques Simplify Transparent Object Detection |
 | | Controlling robot position | Line automation is implemented by detecting the car body hole positions and feeding them back to the thread fastening robot. Sub-pixel processing provides accurate position measurement. | Automotive/Metal | Positioning |
CV-5000 | | | Handy KAIZEN Techniques
Effectively Applying Preprocessing Filters |
 | | Controlling the volume of rubber coating | The volume of rubber coating is checked before processing in an oven. The seat material is sandwiched and thickness is calculated for feedback. | Rubber/Plastic | Thickness, Height, Film thickness |
LK-G5000 | | | New Expert Solution Guide 78 KAIZEN Ideas
New Edition! Latest Process Improvement Guide |
 | | Controlling vibrations in the charger (sieve) | The number and amplitude of vibrations in a sieve that changes powder or fluid are monitored and quantified for controlling charge volumes with high accuracy. | Food/Packaging | Vibration |
EX-V | | | KAIZEN Case Studies
Improving Processes with the Latest Measurement Devices |
 | | Counting packages of chemical agent | By measuring the distance between the edges of the boxes, the number of boxes can be counted. | Food/Packaging | Shape |
LK-G5000 | | | New Expert Solution Guide 78 KAIZEN Ideas
New Edition! Latest Process Improvement Guide |
 | | Detecting MD hub (metallic part) | The optimum size can be selected from 19 various sensor heads. | Electrical/Electronics | Passage Detection, Presence/absence |
ES | | | New! Ultimate Sensor Selection Guide
New Techniques Simplify Transparent Object Detection |
 | | Detecting baskets | Basket detection in an area which enables work pieces with breaks or gaps to accurately reflect light. | Electrical/Electronics | Passage Detection, Presence/absence |
LV | | | GV Series Application Guide
Stable Detection & High-Speed Response |
 | | Detecting board pad marks | Board pad marks of various colours are accurately detected by the digital colour sensor. | Automotive/Metal | Mark/Spot Detection, Passage Detection, Lustre/Glossy Detection, Colour Detection, Presence/absence | 
CZ-V20 | |  | Lustre Detection Sensor
New digital RGB CZ-H72 series sensor head. |
 | | Detecting board suction errors | 1-m long distance and a clear laser spot provide for easy board suction setting. | IC and Semiconductor | Suction/Vacuum Check, Long Detection |
LV | | | GV Series Application Guide
Stable Detection & High-Speed Response |
 | | Detecting connector pin | It is possible to accurately detect even a minute work piece via an extremely small 50 µm diameter spot. It can also be set easily if digital display is used as a guide. | Automotive/Metal | Minute Object Detection, Presence/absence |
LV | | | GV Series Application Guide
Stable Detection & High-Speed Response |
 | | Detecting container position | The container position is controlled relative to the barcode position. | Food/Packaging | Other |
BL-1300 | | | BARCODE Q&A Vol.2
Just Released! Barcode Q&A Vol.2 |
 | | Detecting double feeding of pressing material | Damage to a die due to double feeding of blank material is prevented. | Automotive/Metal | Thickness, Opening |
EX-V | | | KAIZEN Case Studies
Improving Processes with the Latest Measurement Devices |
 | | Detecting exfoliation or overlapping of a bottle label | When printing a date on a bottle label, exfoliation or overlapping of a label that causes a printing failure is detected at a high speed and high accuracy, preventing repeated failures. | Food/Packaging | Thickness |
LK-G5000 | | | New Expert Solution Guide 78 KAIZEN Ideas
New Edition! Latest Process Improvement Guide |
 | | Detecting filaments | A filament is detected over a glass. Setting was previously troublesome because the transparent type was used. | Electrical/Electronics | Minute Object Detection, Transparent Object Detection, Passage Detection, Lustre/Glossy Detection, Colour Detection, Background Interference, Presence/absence |
LV | | | GV Series Application Guide
Stable Detection & High-Speed Response |
 | | Detecting glass panes | The coaxial structure allows accurate detection of a work piece. Without using a slanted sensor the light is reflected back to the sensor from the glass pane. | IC and Semiconductor | Passage Detection, Lustre/Glossy Detection, Background Interference, Presence/absence |
LV | | | GV Series Application Guide
Stable Detection & High-Speed Response |
 | | Detecting grease presence | Accurate detection of grease which shape is unstable is possible through removing influences of 'shine' and distance change. | Automotive/Metal | Passage Detection, Lustre/Glossy Detection, Presence/absence |
CZ-V20 | | | Lustre Detection Sensor
New digital RGB CZ-H72 series sensor head. |
 | | Detecting housing chips and burrs | Chips and burrs that occurred in the connector housing are detected. The adopted scanning method that determines chips and burrs from the compared ambient status provides precise and accurate detection. | IC and Semiconductor | Shape |
CV-5000 | | | Handy KAIZEN Techniques
Effectively Applying Preprocessing Filters |
 | | Detecting improper caulking | Improper caulking can be detected by checking the bottom dead center of the machine. Setting the bottom dead center mode turns on the trigger automatically and the lowest position of the bottom dead center in a sampling period is detected for evaluation of dimensional tolerance. | Electrical/Electronics | Height, Opening |
EX-V | | | KAIZEN Case Studies
Improving Processes with the Latest Measurement Devices |
 | | Detecting incorporation of different kinds of caps | Work pieces of delicate colour differences can accurately be detected. This detection was impossible with conventional photoelectric sensors. This is also impervious to vibration. | Rubber/Plastic | Passage Detection, Colour Detection, Presence/absence |
CZ-V20 | | | Lustre Detection Sensor
New digital RGB CZ-H72 series sensor head. |
 | | Detecting incorrect LED positions | Compared with visual one-hundred percent inspection, man-hours can be surprisingly reduced. Outflow of defective products resulting from oversight can also be prevented. | Electrical/Electronics | Width, Height, Shape |
CV-5000 | | | Handy KAIZEN Techniques
Effectively Applying Preprocessing Filters |
 | | Detecting narrow pin | A bent ejection pin is detected by using the reflective-type laser sensor. This sensor can be set easily to clearly check spots. | Rubber/Plastic | Long Detection, Mark/Spot Detection, Presence/absence |
LV | | | GV Series Application Guide
Stable Detection & High-Speed Response |
 | | Detecting nut welding failure | A nut welding failure or omitting a nut after a spot weld is detected by using an ultra-compact image sensor. | Automotive/Metal | Width, Height, Shape |
CV-5000 | | | Handy KAIZEN Techniques
Effectively Applying Preprocessing Filters |
 | | Detecting open tape and printing failures simultaneously | The distance from the end of a box to the open tape is accurately measured to detect displacement and incline. Print omission and chips can also be detected simultaneously. | Food/Packaging | Edge positioning, Positioning, Distance |
CV-5000 | | | Handy KAIZEN Techniques
Effectively Applying Preprocessing Filters |
 | | Detecting pilot hole clogging | Adjustable beam spot makes the spot area oblong. This provides accurate detection of pilot hole clogging even if the work piece is dislocated. | IC and Semiconductor | Presence/absence |
LV | | | GV Series Application Guide
Stable Detection & High-Speed Response |
 | | Detecting pin passing | The retro-reflective method provides easy installation and accurate detection of transparent pins. | Food/Packaging | Transparent Object Detection, Passage Detection, Presence/absence |
FS-N | | | New! Ultimate Sensor Selection Guide
New Techniques Simplify Transparent Object Detection |
 | | Detecting plastic bottle boundary deviation | A plastic bottle boundary deviation can be accurately detected by canceling refractive light and noise light (e.g., running round light). | Food/Packaging | Transparent Object Detection, Passage Detection, Lustre/Glossy Detection, Background Interference, Presence/absence |
FU | | | New! Ultimate Sensor Selection Guide
New Techniques Simplify Transparent Object Detection |
 | | Detecting press residue | The distance between the upper die and lower die is measured upon press stamping to detect small changes of the bottom dead center caused by residue. | Automotive/Metal | Thickness, Opening |
EX-V | | | KAIZEN Case Studies
Improving Processes with the Latest Measurement Devices |
 | | Detecting print on milk cartons | The long-distance spot enables print on milk cartons to be accurately detected from a distant location. | Food/Packaging | Long Detection, Presence/absence |
LV | | | GV Series Application Guide
Stable Detection & High-Speed Response |
 | | Detecting printed polychrome bag marks | Even if a basic work piece swings or shines it is possible to accurately detect printed polychrome bag marks by using the shine canceling type. It is also possible to detect small bag marks by using the small spot type. | Food/Packaging | Mark/Spot Detection, Passage Detection, Lustre/Glossy Detection, Presence/absence |
CZ-V20 | | | Lustre Detection Sensor
New digital RGB CZ-H72 series sensor head. |
 | | Detecting remaining work pieces | Using the small-spot reflective-type laser sensor it can be detected whether or not a work piece has remained in the mold. This sensor can be easily set to measure small spots of 1.5mm to a maximum distance of 1m. | Rubber/Plastic | Long Detection, Mark/Spot Detection, Presence/absence |
LV | | | GV Series Application Guide
Stable Detection & High-Speed Response |
 | | Detecting roll coater liquid level | The gasket is coated with special liquid. Liquid absence between rolls can be detected by using the digital photoelectric sensor with a built-in amplifier. | Automotive/Metal | Lustre/Glossy Detection, Colour Detection, Background Interference, Presence/absence | 
PZ-V/M | | | New! Ultimate Sensor Selection Guide
New Techniques Simplify Transparent Object Detection |
 | | Detecting rubber tube seams | Via area spot it is possible to detect rubber tube seams even if a work piece wobbles. | Rubber/Plastic | Passage Detection, Presence/absence |
LV | | | GV Series Application Guide
Stable Detection & High-Speed Response |
 | | Detecting sheet roll narrowing | Settings need not be changed because the spot diameter is the same up to 600 mm even if the distance varies with a work piece. This achieves highly accurate detection of sheet roll narrowing. | Food/Packaging | Long Detection, Lustre/Glossy Detection, Presence/absence |
LV | | | GV Series Application Guide
Stable Detection & High-Speed Response |
 | | Detecting small falling targets | The LV can accurately detect small falling targets even if the environment gradually becomes dirty and therefore comes with edge detection mode to automatically adjust sensitivity. | IC and Semiconductor | Presence/absence |
LV | | | GV Series Application Guide
Stable Detection & High-Speed Response |
 | | Detecting tube marks | Small tube marks can accurately be detected because the target spot can be reduced even at a far distance. | Rubber/Plastic | Long Detection, Minute Object Detection, Mark/Spot Detection, Passage Detection, Presence/absence |
CZ-V20 | | | Lustre Detection Sensor
New digital RGB CZ-H72 series sensor head. |
 | | Detecting wafer jumps | The single-lens structure is characteristically equivalent to the transparent type. This enables you to securely cope with erratic wafer jump positions. | IC and Semiconductor | Transparent Object Detection, Presence/absence |
LV | | | GV Series Application Guide
Stable Detection & High-Speed Response |
 | | Detecting wafer ring | The sensor position does not need to be changed even if the wafer aperture changes because of the variable long-distance spot. | IC and Semiconductor | Long Detection, Presence/absence |
LV | | | GV Series Application Guide
Stable Detection & High-Speed Response |
 | | Detecting whether a package exists | Packages are accurately detected without being affected by glossy backgrounds, product colours or inclines. | Food/Packaging | Passage Detection, Lustre/Glossy Detection, Colour Detection, Background Interference, Presence/absence |
PZ-V/M | | | New! Ultimate Sensor Selection Guide
New Techniques Simplify Transparent Object Detection |
 | | Detecting whether a tap exists | An optical sensor determines if a tap exists. A tap can be detected without cooling for the sensor because it can be installed in a distant location. | Automotive/Metal | Long Detection |
LV | | | GV Series Application Guide
Stable Detection & High-Speed Response |
 | | Detecting whether bread dough exists | Accurate received radiation intensity can be obtained even if the shape is unstable. | Food/Packaging | Long Detection |
LV | | | GV Series Application Guide
Stable Detection & High-Speed Response |
 | | Detecting whether instruction manual (pack insert) is included | A fluorescent component in paper is detected by using the phosphor detecting UV sensor and checks if the instruction manual (pack insert) is included in the drug box. | Food/Packaging | Passage Detection, Lustre/Glossy Detection, Presence/absence |
CZ-V20 | | | Lustre Detection Sensor
New digital RGB CZ-H72 series sensor head. |
 | | Detecting whether lot number exists | Whether a lot number exists can be checked. It is possible to accurately detect even small displacements because the lot number are detected via an area spot. | Rubber/Plastic | Minute Object Detection, Mark/Spot Detection, Presence/absence |
LV | | | GV Series Application Guide
Stable Detection & High-Speed Response |
 | | Detecting whether sweet pack exists | Even a paper pack with an unstable shape can accurately obtain stable reflective light quantities with an area spot. | Food/Packaging | Passage Detection, Lustre/Glossy Detection, Colour Detection, Background Interference, Presence/absence |
LV | | | GV Series Application Guide
Stable Detection & High-Speed Response |
 | | Detection of runout due to chucking failure | When a work piece is chucked, particles are sometimes trapped between the work piece and chuck, resulting in deflection of the work piece. Such deflection is detected on a non-contact basis. | Automotive/Metal | Runout, Curvature |
EX-V | | | KAIZEN Case Studies
Improving Processes with the Latest Measurement Devices |
 | | Die-cast aluminum observation | The 54,000,000-pixel 3CCD mode was created to achieve high-definition images. This enables you to accurately understand the surface condition of an object. | Automotive/Metal | Other |
VHX-1000 | | | Presenting helpful hints
Enhancing quality, cost, and delivery in a variety of industries. |
 | | Differentiating different kinds of cellular phone buttons | The different kinds of cellular phone buttons are differentiated via pattern matching. | Electrical/Electronics | Diameter |
CV-5000 | | | Handy KAIZEN Techniques
Effectively Applying Preprocessing Filters |
 | | Differentiating envelope direction | Envelope direction detection is accurate because the direction is detected based on character widths even if the characters are displaced. | Food/Packaging | Presence/absence |
LV | | | GV Series Application Guide
Stable Detection & High-Speed Response |
 | | Differentiating harness colour | A harness colour can be freely set without reference to the device specifications because it can be set to a free range and the spot can be adjusted. | Automotive/Metal | Long Detection, Presence/absence |
LV | | | GV Series Application Guide
Stable Detection & High-Speed Response |
 | | Differentiating oil seal stem type | The oil seal stem type is differentiated in the engine assembly process. This yields increases due to the oil seal stem type being distinguished prior to the engine assembly process. | Automotive/Metal | Passage Detection, Lustre/Glossy Detection, Colour Detection, Presence/absence |
LV | | | GV Series Application Guide
Stable Detection & High-Speed Response |
 | | Differentiating ridge chip types | The ridge chips are differentiated. The PZ series is used because it is not affected by colour. | Construction | Lustre/Glossy Detection, Colour Detection, Background Interference, Presence/absence |
PZ-V/M | | | New! Ultimate Sensor Selection Guide
New Techniques Simplify Transparent Object Detection |
 | | Differentiating two sides of a chip after the emboss sealing | It is possible to accurately differentiate the two sides of a transparent film by using the cancel type in order to cancel specularly reflective influences. | IC and Semiconductor | Transparent Object Detection, Passage Detection, Lustre/Glossy Detection, Presence/absence |
CZ-V20 | | | Lustre Detection Sensor
New digital RGB CZ-H72 series sensor head. |
 | | Differentiating up/down inversion of work pieces | The diameter differential determines the up/down inversion of the target. A sharp area beam laser makes it possible to accurately utilize the optical axis even between small gaps. | Rubber/Plastic | Passage Detection, Presence/absence |
LV | | | GV Series Application Guide
Stable Detection & High-Speed Response |
 | | Differentiating whether a steel bar exists | The conventional sensors could not stably detect steel bars if they were oiled. Area differentiation, however, enables you to accurately detect steel bars. | Automotive/Metal | Lustre/Glossy Detection, Presence/absence |
LV | | | GV Series Application Guide
Stable Detection & High-Speed Response |
 | | Differentiating whether an O-ring exists | It is possible to select the optimum spot on the target object. Detection on work pieces whose shapes are unstable is possible because the work piece components can be differentiated by colour. | Automotive/Metal | Long Detection, Minute Object Detection, Mark/Spot Detection, Passage Detection, Colour Detection, Presence/absence |
CZ-V20 | | | Lustre Detection Sensor
New digital RGB CZ-H72 series sensor head. |
 | | Differentiating whether ball bearing grease exists | It is possible to accurately detect grease due to a fluorescent component within the grease, therefore it will even ignore glossy metals or any other specularly reflective influences. | Automotive/Metal | Lustre/Glossy Detection, Colour Detection, Presence/absence |
CZ-V20 | | | Lustre Detection Sensor
New digital RGB CZ-H72 series sensor head. |
 | | Drill tip observation | The depth-of-field is deep, allowing the microscope to focus on any part. This enables you to accurately understand the status of abrasion and chipping of blade edges. | Automotive/Metal | Other |
VHX-1000 | | | Presenting helpful hints
Enhancing quality, cost, and delivery in a variety of industries. |
 | | Electron observation gun | The camera section is the size of a small pen, so objects can be observed as they are without being disassembled. | Electrical/Electronics | Other |
VHX-1000 | | | Presenting helpful hints
Enhancing quality, cost, and delivery in a variety of industries. |
 | | Emboss tape chip count | Accurate detection of emboss tape chips is possible at high speeds. | IC and Semiconductor | Minute Object Detection, Mark/Spot Detection, Passage Detection, Presence/absence |
FS-N | | | New! Ultimate Sensor Selection Guide
New Techniques Simplify Transparent Object Detection |
 | | Failsafe device when an open cassette is mounted | Outstanding read depth and the best angle characteristic in the world provide accurate reading of barcodes attached to open cassettes. | IC and Semiconductor | Other |
BL-1300 | | | BARCODE Q&A Vol.2
Just Released! Barcode Q&A Vol.2 |
 | | Forge metal flow observation | You only have to focus the lens on what you want to observe. Data can also easily be stored. | Automotive/Metal | Other |
VHX-1000 | | | Presenting helpful hints
Enhancing quality, cost, and delivery in a variety of industries. |
 | | HDD component traceability | The two-dimensional codes attached to the HDD component are read and all production and inspection histories are automatically managed. | IC and Semiconductor | 2D Barcode | 
SR-600 | |  | New Product: Ultra-Compact 2D Code Reader
View the Video |
 | | HDD observation head | It is possible to accurately focus a camera on a steric object because the depth-of-field is deep. This enables you to accurately understand the conditions of the object. | Electrical/Electronics | Other |
VHX-1000 | | | Presenting helpful hints
Enhancing quality, cost, and delivery in a variety of industries. |
 | | Horsetail spore observation | A timer recording function is installed that automatically records images for set times. A meditated approach can be easily taken. | R&D | Other |
VHX-1000 | | | Presenting helpful hints
Enhancing quality, cost, and delivery in a variety of industries. |
 | | Inspecting various ICs | Composite inspection for IC lead center pitch measurement, lead curve, and omission, etc., can be performed at a high speeds. In the past, this inspection could be performed only by expensive dedicated machines. | IC and Semiconductor | Diameter, Distance |
CV-5000 | | | Handy KAIZEN Techniques
Effectively Applying Preprocessing Filters |
 | | Inspecting various container failures | Simultaneous inspection for a floating caps and whether the date is printed can be performed by using one machine. It can also evaluate all of the objects by a position adjustment function and a timing shutter. | Food/Packaging | Opening |
CV-5000 | | | Handy KAIZEN Techniques
Effectively Applying Preprocessing Filters |
 | | LCD positioning process | A positioning failure can be prevented by checking the locations of marks and frames on the LCD panel. | IC and Semiconductor | Positioning |
CV-5000 | | | Handy KAIZEN Techniques
Effectively Applying Preprocessing Filters |
 | | Management of 300-mm FOUP barcodes | The barcodes attached to the wafer carrier are read over glass. Due to the ±60° overwhelming angle characteristic, the installation location is not restricted. The smallest body size in the world also completely fits the 300-mm wafer load port. | IC and Semiconductor | Other |
BL-1300 | | | BARCODE Q&A Vol.2
Just Released! Barcode Q&A Vol.2 |
 | | Management of engine serial numbers | Barcodes are read to prevent incorrect positioning. Full automation eliminates the conventional visual work to drastically improve efficiency. Barcodes are accurately read even if they are damaged or stained. | Automotive/Metal | Other |
BL-1300 | | | BARCODE Q&A Vol.2
Just Released! Barcode Q&A Vol.2 |
 | | Managing discharge pressure of various cleaning lines | An appropriate pressure is maintained by monitoring discharge pressure for cleaning a bin before the fluid is poured and water is supplied to the tank, which helps prevent problems. | Automotive/Metal | Pressure Control |
AP-V80W | | | Digital Pressure Sensors Guide
Pneumatic device guide to solving common sensing problems. |
 | | Managing reticle barcodes | Managing reticle and reticle carriers in barcode format improves efficiency. | IC and Semiconductor | Other |
BL-1300 | | | BARCODE Q&A Vol.2
Just Released! Barcode Q&A Vol.2 |
 | | Measurement height/curvature of piston head | Piston head concavity is measured by movement of a jig, and a type is determined. | Automotive/Metal | Height, Parallelism, Depth |
EX-V | | | KAIZEN Case Studies
Improving Processes with the Latest Measurement Devices |
 | | Measurement of sand mold surface ripple | Accurate shape measurement without the influence of bad conditions such as dust particles enables the prevention of faulty casting. | Automotive/Metal | Distortion/Warpage, Curvature, Depth |
LK-G5000 | | | New Expert Solution Guide 78 KAIZEN Ideas
New Edition! Latest Process Improvement Guide |
 | | Measuring TAB tape lead pitch | The lead center pitch on the LCD TAB tape is measured. | IC and Semiconductor | Width, Distance |
CV-5000 | | | Handy KAIZEN Techniques
Effectively Applying Preprocessing Filters |
 | | Measuring bank amounts when rubber sheets are rolled | The bank amount when the rubber sheet is rolled is accurately monitored by the ultra-compact image sensor from a distance that is not influenced by heat. | Rubber/Plastic | Diameter |
CV-5000 | | | Handy KAIZEN Techniques
Effectively Applying Preprocessing Filters |
 | | Measuring behavior of engine valve | 50-kHz sampling allows non-contact measuring movement characteristics of an engine valve moving at a high speed. | Automotive/Metal | Vibration, Stroke |
LK-G5000 | | | New Expert Solution Guide 78 KAIZEN Ideas
New Edition! Latest Process Improvement Guide |
 | | Measuring car height while driving | The LK-G Series features an ultra long detecting distance as well as a high resolution of 10 m in high-precision mode. Together with the fast response speed, it permits accurate data collection which is impossible with conventional sensors. | Automotive/Metal | Vibration, Height, Stroke |
LK-G5000 | | | New Expert Solution Guide 78 KAIZEN Ideas
New Edition! Latest Process Improvement Guide |
 | | Measuring depth of laser marker imprinting on a resin mold | The LT-9000 series double-scan laser sensor is used to measure the depth of laser marker imprinting, such as a lot number on an IC resin mold. Measurement with a resolution of 0.01 µm is possible with a view of an 85 magnified image on a monitor screen. | IC and Semiconductor | Width, Depth | 
LT-9000 | | | KAIZEN Case Studies
Improving Processes with the Latest Measurement Devices |
 | | Measuring die distortions in a die-casting machine | Distortion and displacement of a die caused by its own weight or faulty mounting is prevented. A small and thin sensor head makes high-accuracy measurement possible even in a narrow gap in equipment. | Automotive/Metal | Distortion/Warpage, Curvature |
EX-V | | | KAIZEN Case Studies
Improving Processes with the Latest Measurement Devices |
 | | Measuring dimensions of a specimen | Accurate tracing of a surface shape is possible with a 2 µm ultra-miniature spot diameter. | R&D | Shape, Depth |
LT-9000 | | | KAIZEN Case Studies
Improving Processes with the Latest Measurement Devices |
 | | Measuring displacement of a structure on a vibration table | With an easy setting, a major displacement is measured from a distance. Accurate measurement is possible without contact pressure against an object. | R&D | Vibration, Distortion/Warpage, Stroke |
LK-G5000 | | | New Expert Solution Guide 78 KAIZEN Ideas
New Edition! Latest Process Improvement Guide |
 | | Measuring displacement under load test | Measuring displacement caused by a load test, on a non-contact basis. Measurement values are input directly to a personal computer. | Automotive/Metal | Curvature, Shape, Distance |
LK-G5000 | | | New Expert Solution Guide 78 KAIZEN Ideas
New Edition! Latest Process Improvement Guide |
 | | Measuring eccentricity of a rubber roller | Measurement by high-speed sampling is possible even on a work piece with low reflectivity, using state-of-the-art reflection light control. | Rubber/Plastic | Eccentricity, Height |
LK-G5000 | | | New Expert Solution Guide 78 KAIZEN Ideas
New Edition! Latest Process Improvement Guide |
 | | Measuring end face angle and width of construction board | A faulty angle or faulty width caused by wearing of molding die or variations of extrusion pressure is detected. | Construction | Width, Parallelism |
LK-G5000 | | | New Expert Solution Guide 78 KAIZEN Ideas
New Edition! Latest Process Improvement Guide |
 | | Measuring expansion and shrinkage of sealant | Changes in sealant due to heat and temperature variations over time can be measured on a non-contact basis. A 0.4 µm resolution enables detection of infinitesimal changes. | R&D | Positioning, Curvature, Opening |
EX-V | | | KAIZEN Case Studies
Improving Processes with the Latest Measurement Devices |
 | | Measuring height of BGA ball | The difference in height among solder balls due to warpage of BGA board is measured with high accuracy. | IC and Semiconductor | Height, Shape |
LK-G5000 | | | New Expert Solution Guide 78 KAIZEN Ideas
New Edition! Latest Process Improvement Guide |
 | | Measuring load deformation of construction materials and metallic plates | Load deformation can be continuously measured. Four measurement points can also be obtained at the same time. In addition, this can also be used for intensity and break tests. | R&D | Vibration, Runout, Stroke |
CV-5000 | | | Handy KAIZEN Techniques
Effectively Applying Preprocessing Filters |
 | | Measuring noodle thickness | A laser displacement sensor measures the thickness of noodles. If the thickness is found to be abnormal a NG signal is generated. Since this is a non-contact type of detection, processes can be run with continuous monitoring and measurement. | Food/Packaging | Thickness |
LK-G5000 | | | New Expert Solution Guide 78 KAIZEN Ideas
New Edition! Latest Process Improvement Guide |
 | | Measuring outer diameter and eccentricity of roller | The outer diameter of the sheet feeding roller on a copier or printer is measured on a non-contact basis. Eccentricity can be measured at the same time. | Electrical/Electronics | Vibration, Diameter | 
LS-7000 | |  | Digital Micrometer LS-7000 Series
Having trouble with micrometer delivery? |
 | | Measuring outer diameter immediately after lathing process | The outer diameter of a work piece can be measured immediately after the lathing process. This prevents defective products from being continuously manufactured. | Automotive/Metal | Eccentricity, Diameter, Shape |
LK-G5000 | | | New Expert Solution Guide 78 KAIZEN Ideas
New Edition! Latest Process Improvement Guide |
 | | Measuring pin pitch | The maximum, minimum, and mean values can be calculated simply by enclosing the pin portion in a window. Mega-pixel CCD further improves measurement accuracy. | Electrical/Electronics | Width, Diameter, Distance |
CV-5000 | | | Handy KAIZEN Techniques
Effectively Applying Preprocessing Filters |
 | | Measuring printing dimensions of paste solder | The LT-9000 series double-scan laser sensor is used to measure the height and dimensions of paste solder on a board. Measurement at a maximum resolution of 0.01 µm is possible. Using the world's first high-accuracy double scanning system, measurement is possible on a wet surface and a mirror-finished or a round surface. By moving a lens in the sensor, the paste of the solder paste can be measured accurately. | IC and Semiconductor | Width, Height, Shape |
LT-9000 | | | KAIZEN Case Studies
Improving Processes with the Latest Measurement Devices |
 | | Measuring shape of IC resin mold | The shape of a resin mold is measured on a non-contact basis. A state-of-the-art measurement algorithm allows precise measurement of a semi-transparent mold. | IC and Semiconductor | Height, Shape |
LK-G5000 | | | New Expert Solution Guide 78 KAIZEN Ideas
New Edition! Latest Process Improvement Guide |
 | | Measuring surface deflection on a hard disk | 50-kHz sampling allows non-contact measuring movement characteristics of a hard disk rotating at a high speed. | Electrical/Electronics | Runout |
LK-G5000 | | | New Expert Solution Guide 78 KAIZEN Ideas
New Edition! Latest Process Improvement Guide |
 | | Measuring surface dimensions of a resin mold product | The LT-9000 series double-scan laser sensor is used to measure surface dimensions and surface roughness of a resin mold product used in an electronic component. Measurement at a resolution of 0.01 µm is possible. The LT-9000 series allows measurement with a 85x magnified image on a monitor screen, which allows positioning a measurement target accurately. | Rubber/Plastic | Shape, Parallelism |
LT-9000 | | | KAIZEN Case Studies
Improving Processes with the Latest Measurement Devices |
 | | Measuring the Width and Camber Angle of a Rubber Sheet | The positions of edges are accurately measured and output as feedback data. This prevents producing defective products caused by improper edge position while the rubber sheet is wound or transferred. | Rubber/Plastic | Width, Positioning, Diameter, Parallelism |
LS-7000 | | | Digital Micrometer LS-7000 Series
Having trouble with micrometer delivery? |
 | | Measuring the height at multiple points in a specified range | The average, peak or bottom height can be measured. Warpage or swell is measured by calculating the heights at specified points. | Automotive/Metal, Electrical/Electronics, Food/Packaging | Height, Depth |
LJ-G | | | Measurement & Application Guide
RESEARCH & DEVELOPMENT |
 | | Measuring the number of disk rotations | The number of disk rotations is measured by detecting a disk clamp mark with a high-speed sensor. | Automotive/Metal | Mark/Spot Detection, Presence/absence | 
FS-01 | | | New! Ultimate Sensor Selection Guide
New Techniques Simplify Transparent Object Detection |
 | | Measuring the outer diameters of electrical wire (X and Y axes simultaneous measurement) | The outer diameter of an electrical wire is measured in the X and Y axes simultaneaously, and the mean value of the diameters is calculated. Reliability is improved versus measuring only one axis. | Automotive/Metal, Electrical/Electronics | Width, Diameter |
LS-7000 | | | Digital Micrometer LS-7000 Series
Having trouble with micrometer delivery? |
 | | Measuring the profile of a test piece | New principles are employed for the CCD system. Regardless of colour and material surface (rock, metal or rubber) high-accuracy and stable measurement are possible. | R&D | Shape, Parallelism |
LK-G5000 | | | New Expert Solution Guide 78 KAIZEN Ideas
New Edition! Latest Process Improvement Guide |
 | | Measuring thickness of a brake disk | The wide-spot optical system allows measurement without the influence of rough surfaces. | Automotive/Metal | Thickness, Eccentricity |
LK-G5000 | | | New Expert Solution Guide 78 KAIZEN Ideas
New Edition! Latest Process Improvement Guide |
 | | Measuring thickness of a plate | The thickness of a pole plate can be continually monitored in-line. Improper thickness can be detected immediately, minimizing waste production. | Electrical/Electronics | Thickness |
LK-G5000 | | | New Expert Solution Guide 78 KAIZEN Ideas
New Edition! Latest Process Improvement Guide |
 | | Measuring three dimensions of a multi-axial robot | The XYZ position is measured by using two cameras. | Automotive/Metal | Positioning |
CV-5000 | | | Handy KAIZEN Techniques
Effectively Applying Preprocessing Filters |
| | Measuring three dimensions of multi-axial robots | The XYZ position is measured by using two cameras. | R&D | Positioning |
CV-5000 | | | Handy KAIZEN Techniques
Effectively Applying Preprocessing Filters |
 | | Measuring vibration in a taping machine | Rattling in a taping machine causes displacement or running off of chip components in embossing tape. | IC and Semiconductor | Vibration, Stroke |
EX-V | | | KAIZEN Case Studies
Improving Processes with the Latest Measurement Devices |
 | | Measuring warpage of a board | warpage of a board is measured on a non-contact basis. Accurate measurement is possible on the surface of a semi-transparent board. | IC and Semiconductor | Distortion/Warpage |
LK-G5000 | | | New Expert Solution Guide 78 KAIZEN Ideas
New Edition! Latest Process Improvement Guide |
 | | Measuring warpage of a connecting rod | Bending and warpage of a connecting rod after pressing is measured to prevent outflow of defective products. Measurement of two or more points is possible at the same time with connection of two measurement sets allowed. | Automotive/Metal | Curvature, Diameter |
LS-7000 | | | Digital Micrometer LS-7000 Series
Having trouble with micrometer delivery? |
 | | Measuring warpage of printed circuit board | With a newly developed algorithm, high-accuracy measurement is possible on a semi-transparent work piece. | Electrical/Electronics | Curvature, Shape |
LK-G5000 | | | New Expert Solution Guide 78 KAIZEN Ideas
New Edition! Latest Process Improvement Guide |
 | | Measuring wear dimensions of spattering target | High-accuracy measuring of surface shape allows precise calculation of wearing. | IC and Semiconductor | Height, Shape |
LK-G5000 | | | New Expert Solution Guide 78 KAIZEN Ideas
New Edition! Latest Process Improvement Guide |
 | | Measuring width/gap with a specified measurement mode | Width and gaps are measured on the basis of the surface profile. High accuracy measurements are carried out without being affected by the colour of targets. | Automotive/Metal, Electrical/Electronics, Food/Packaging | Thickness, Width, Distance |
LJ-G | | | Measurement & Application Guide
RESEARCH & DEVELOPMENT |
 | | Measuring/judging a section in a flash | A section area is instantly measured in a specified range. This allows for the quality control of profiles and sections. | Automotive/Metal, Electrical/Electronics, Food/Packaging | Thickness, Width, Height, Shape, Parallelism, Depth |
LJ-G | | | Measurement & Application Guide
RESEARCH & DEVELOPMENT |
 | | Medical product observation | The 54,000,000-pixel 3CCD mode can be used to achieve high colour reproducibility. Objects can be observed as they are. | Food/Packaging | Other |
VHX-1000 | | | Presenting helpful hints
Enhancing quality, cost, and delivery in a variety of industries. |
 | | Metallic material flexibility test | In the past, an expensive dedicated measuring instrument was used or metallic material flexibility was visually checked. The advent of an image sensor has enabled continuous measurement of coordinate data. | R&D | Width, Distance |
CV-5000 | | | Handy KAIZEN Techniques
Effectively Applying Preprocessing Filters |
 | | Metallic structure observation | Coaxial epi-illumination enables you to observe the mirrored surface of the target in a bright field. | Automotive/Metal | Other |
VHX-1000 | | | Presenting helpful hints
Enhancing quality, cost, and delivery in a variety of industries. |
 | | Monitoring pressure of various devices | Vacuum arrival in the chamber and atmospheric pressure return are checked and branch box pressure is controlled. | IC and Semiconductor | Pressure Control |
AP-V80W | | | Digital Pressure Sensors Guide
Pneumatic device guide to solving common sensing problems. |
 | | Observation of fish scales | It is possible to observe the scales of a fish in transparent illumination. Many communication functions such as USB, LAN, and SCSI are available. Image data can also easily be captured to a PC. | R&D | Other |
VHX-1000 | | | Presenting helpful hints
Enhancing quality, cost, and delivery in a variety of industries. |
 | | Oleaster leaf back hair observation | 54,000,000-pixel 3CCD mode is installed to achieve high colour reproducibility. | R&D | Other |
VHX-1000 | | | Presenting helpful hints
Enhancing quality, cost, and delivery in a variety of industries. |
 | | Omitting BGA board paste | A die adhesion failure resulting from an insufficient paste amount can be detected early. Mass production of faulty products will be stopped. | IC and Semiconductor | Distance |
CV-5000 | | | Handy KAIZEN Techniques
Effectively Applying Preprocessing Filters |
 | | Pallet numbers in press and casting process | The types of dedicated pallets that differ per car type are differentiated to prevent device breakage resulting from a loading error. | Automotive/Metal | Other |
BL-1300 | | | BARCODE Q&A Vol.2
Just Released! Barcode Q&A Vol.2 |
 | | Parts feeder | If a work piece is found in the parts feeder, supply is canceled. If sensor output exceeds a constant time, supply is restarted. | Automotive/Metal | Passage Detection, Presence/absence |
PZ-V/M | | | New! Ultimate Sensor Selection Guide
New Techniques Simplify Transparent Object Detection |
 | | Petri dish observation | Making the lens magnification variable enables a digital microscope to cover various observation areas. | R&D | Other |
VHX-1000 | | | Presenting helpful hints
Enhancing quality, cost, and delivery in a variety of industries. |
 | | Positioning boards | Board positioning is accurate because boards are detected by area. It is also easy to set through a digital display. | IC and Semiconductor | Presence/absence |
LV | | | GV Series Application Guide
Stable Detection & High-Speed Response |
 | | Positioning capacitor oil injection holes | Adjustable beam spot makes the spot oblong. This provides stable detection of capacitor oil injection holes even if the work piece is dislocated. | IC and Semiconductor | Presence/absence |
LV | | | GV Series Application Guide
Stable Detection & High-Speed Response |
 | | Preventing black rubber injection errors | A clear laser spot enables accurate black rubber injection detection even from a distant location. | Automotive/Metal | Long Detection, Colour Detection, Presence/absence |
LV | | | GV Series Application Guide
Stable Detection & High-Speed Response |
 | | Preventing dust adhesion to a food package | Air purge function prevents dust from adhering to the inside of packaging. | Food/Packaging, Rubber/Plastic | Other | 
SJ-G | |  | Know-how Guide for Static Elimination
New Static Elimination Technology |
 | | Preventing dust adhesion to highly functional film | Effectively prevents the adhesion of dust due to static discharge when winding off film. | Rubber/Plastic | Other |
SJ-G | | | Know-how Guide for Static Elimination
New Static Elimination Technology |
 | | Preventing incorporation of different kinds ofautomotive glass | Incorporation of different kinds of automotive glass is checked by the CZ digital colour differentiation sensor. This sensor can accurately differentiate colours such as transparent and smoky colours. | Automotive/Metal | Transparent Object Detection, Passage Detection, Colour Detection, Presence/absence |
CZ-V20 | | | Lustre Detection Sensor
New digital RGB CZ-H72 series sensor head. |
 | | Prevention of adherence of dust during bumper painting | Static elimination prevents paint defects such as lumps caused by adherence of dust during the bumper painting process. | Automotive/Metal | Other |
SJ-G | | | Know-how Guide for Static Elimination
New Static Elimination Technology |
 | | Prevention of bottle label misalignment | When static builds up during labelling of plastic bottles, dust gets caught between the label and the bottle, causing labels to lift, tear or become deformed. Reliable static elimination prevents the adherence of dust. | Food/Packaging | Other | 
SJ-F300 | | | Know-how Guide for Static Elimination
New Static Elimination Technology |
 | | Serial management in the cellular phone inspection process | Space restrictions are not applied to installation of tools and devices because the cellular phone has the smallest body size in the world. | Electrical/Electronics | Other |
BL-1300 | | | BARCODE Q&A Vol.2
Just Released! Barcode Q&A Vol.2 |
 | | Serial management of air back inflators | The barcodes attached to the air bag are read and the production and inspection history is managed. | Automotive/Metal | Other |
BL-1300 | | | BARCODE Q&A Vol.2
Just Released! Barcode Q&A Vol.2 |
 | | Serial management of boards | Barcodes are securely read even if an oscillation occurs or there are variations in work pieces. Barcodes on the boards are also accurately read. | Electrical/Electronics | Other |
BL-1300 | | | BARCODE Q&A Vol.2
Just Released! Barcode Q&A Vol.2 |
 | | Serial management of boards | Barcodes on the boards are securely managed. Barcodes can be securely read even if oscillation occurs or there are variations in work pieces. | IC and Semiconductor | Other |
BL-1300 | | | BARCODE Q&A Vol.2
Just Released! Barcode Q&A Vol.2 |
 | | Serial management of print boards | Two-dimensional codes are read and all production and inspection histories are automatically managed. | Automotive/Metal | 2D Barcode |
SR-600 | | | New Product: Ultra-Compact 2D Code Reader
View the Video |
 | | Serial management of wafer rings | Even ceramic labels and barcodes printed by laser are accurately read by the AGC circuit. | IC and Semiconductor | Other |
BL-1300 | | | BARCODE Q&A Vol.2
Just Released! Barcode Q&A Vol.2 |
 | | Sponge gourd stem observation | 54,000,000-pixel 3CCD mode is installed to achieve high colour reproducibility. Objects can be observed as they are. | R&D | Other |
VHX-1000 | | | Presenting helpful hints
Enhancing quality, cost, and delivery in a variety of industries. |
 | | Sponge observation | The depth-of-field is deep, so this microscope can deeply focus on an object. | Food/Packaging | Other |
VHX-1000 | | | Presenting helpful hints
Enhancing quality, cost, and delivery in a variety of industries. |
 | | Static elimination during liquid crystal glass transfer | Prevents adherence of dust and destruction of circuit patterns due to static build-up during stripping. Electrostatic charge monitor provides high-speed, high-precision static elimination. | Electrical/Electronics | Other |
SJ-G | | | Know-how Guide for Static Elimination
New Static Elimination Technology |
 | | Static elimination during wafer mounting | Prevents damage to electronic components caused by static by eliminating static during mounting. | Electrical/Electronics | Other |
SJ-F300 | | | Know-how Guide for Static Elimination
New Static Elimination Technology |
 | | Static elimination in CCD | Compact Φ10 mm static elimination head allows installation in confined spaces. | IC and Semiconductor | Other | 
SJ-M | | | Know-how Guide for Static Elimination
New Static Elimination Technology |
 | | Static elimination in mold | Heat-resistant specifications allow use in high-temperature environments of up to 80°C. Perfectly suited for static removal in molds in the residual heat process and drying processes. | Food/Packaging, Rubber/Plastic | Other |
SJ-M | | | Know-how Guide for Static Elimination
New Static Elimination Technology |
 | | Static elimination in parts feeder | High-pressure air purge system of 0.5MPa removes dust while eliminating static. | Rubber/Plastic | Other |
SJ-M | | | Know-how Guide for Static Elimination
New Static Elimination Technology |
 | | Static elimination in parts feeder | Resolves problems with parts feeder blockages and supply errors caused by incorrect orientation of front/back, wrong direction, poor position, and other issues. Offers the highest elimination speed in its class and supports inline application. | Electrical/Electronics | Other |
SJ-F300 | | | Know-how Guide for Static Elimination
New Static Elimination Technology |
 | | Static elimination in plastic parts | Eliminates static in plastic parts which are susceptible to static build-up, and prevents the absorption of parts that were once a cause of short time stoppages. | Rubber/Plastic | Other |
SJ-F300 | | | Know-how Guide for Static Elimination
New Static Elimination Technology |
 | | Strainer clogging | A clogged filter is detected by the differential pressure sensor when the hydraulic oil for the die-cast machine is cleaned, cooled, and circulated. | Automotive/Metal | Pressure Control |
AP-V80W | | | Digital Pressure Sensors Guide
Pneumatic device guide to solving common sensing problems. |
 | | Thermal displacement test on metals | Non-contact measuring allows stable measurement of displacement of material in a high-temperature chamber through glass. | Automotive/Metal | Distortion/Warpage, Curvature |
LK-G5000 | | | New Expert Solution Guide 78 KAIZEN Ideas
New Edition! Latest Process Improvement Guide |
 | | VTR observation head | This digital microscope can observe objects in the condition in which they are set because the observation distance is longer than the observation distance of conventional microscopes. | Electrical/Electronics | Other |
VHX-1000 | | | Presenting helpful hints
Enhancing quality, cost, and delivery in a variety of industries. |
+32-15-281-222