Variety of heads enables abundance of applications
Detect robot arm chuck precision on the X-, Y- and Z-axes. The long range head enables detection from long distances.
Position the vision system on the Z-axis during substrate inspection.This device delivers stable detection, even for different targetworkpiece materials.
Detect the position of roll chucks for film winding. Save a huge amount of adjustment time, even for different equipment.
The position of a carton on a pallet transferred by a palletiser is detected. The detection is stable regardless of the changes in colours or the inclination of cartons.
Differentiate between steel plates or catch two sheets going through at once with thickness differentiation in the press process. The long range head enables differentiation from long distances, even for large-sized pressing.
Thickness and width can be simultaneously measured immediately after the extrusion process. In addition, man-hours for setup and product changeovers are reduced using the thickness calibration function.
Differentiate single/double sheets when transferring substrates. This device enables stable detection, even for different substrate material.
This device constantly monitors thickness differentiation of sheet material. The multi-point head allows you to detect irregularities in the thickness of edges and in the bodies of materials.
Detect seams in rubber sheets. Sensors above and below the workpieces enable stable detection, even when the sheets flip-flop.
Detect welding seams on steel plates. The Height Difference Count Filter Function enables stable detection.
The IL Series counts how many items are being transported along a conveyer, in addition to the non-contact detection of uneven stacking in the stacker. Reliable detection regardless of colour changes in the targets.
Count the number of air conditioner filter sheets. The High Pass Filter Function enables stable detection, even for workpiece whose height is not constant.
Calculates the inclination by measuring multiple points on the stage prior to transferring to the furnace. Transferring the product after correcting the inclination allows for consistent temperature control.
The ultra-long range type can be installed at a distance of 3500 mm at maximum from the target, eliminating worries for the ambient temperature.
Reliable differentiation, even in highly variable small parts, using a highprecision sensor head. Even when the variety changes, external changeover of up to 4 patterns is possible by setting items in the bank function.
Check whether chips are present or not, or if two are present by mistake during chip transfer. This device enables stable detection, even during high-speed transfers.
Control the distance between the head of marking instruments and workpiece. This device enables stable detection, even for different target workpiece.
Control feed speed and tension rolling with constant monitoring of sheet diameter during rolling and unrolling processes.
Control the height of welding torches. Boost welding precision through constant, exhaustive monitoring.
The ultra-long range type can be installed at a distance of 3500 mm at maximum from the target, which allows hoop control of steel plates or sheet materials being transferred.
As the sensor head is compact, multiple point measurements of small-scale boards are possible. By calculating the measurement data externally, simultaneous measurements of positioning and warpage are possible.
Detect the warp of H-beam flanges at multiple points before using a correction mechanism. Use a long range head for compatibility with many different kinds of workpiece.
Proactively prevent press defects by constantly monitoring the amount of press strokes and the bottom dead centre of presses. Use a long range head to enable compatibility with large-sized pressing machine.
Prevent rolling disorders by controlling traverser strokes while measuring the amount that bobbins roll to provide feedback to the instrument.