Safety Laser Scanner

SZ series

Configuration Software

The easiest, most intuitive, step-by-step scanner configuration software you will ever use

Advanced Option (free download)

PC configuration software
Safety device configurator

Configuration software SZ Configurator is fast,easy, and loaded with useful, time-saving tools [SZ-01S][SZ-16V]

Configuration software SZ Configurator is fast,easy, and loaded with useful, time-saving tools

Automatic -Drawing function

Automatic -Drawing function

For the ultimate in ease of use, simply mount the SZ in the desired location, clear the area, and click the “Automatic Drawing” tool. Immediately the SZ draws a zone around existing obstacles.

Sends the current status to external devices State Information Output [Industry's First] [SZ-16V]

Sends the current status to external devices State Information Output

This function can send a signal to a PLC or other non-safety device for the intent of displaying real-time status information on an HMI or other interface. For example “Lens is soiled, please wipe clean, then reset” or “EDM Error. Please check external devices”.

Protection zones/warning zones can be configured with just the main unit, without the need for a PC
[Industry's First] [SZ-01S]

Protection zones/warning zones can be configured with just the main unit, without the need for a PC

Rectangular zones can be configured without a PC through the information display. Configuration is easy and it is no longer necessary to bring a PC for on-site operation.

OPERATING PRINCIPLE

revolving_mirror

Distance measurement using the TOF (Time of Flight) method
Calculates the time during which a pulse-emitted beam returns after hitting the detection target.


Measurement at high-resolution of 0.36°pitch
270° range is measured in a radial fashion using the TOF method at 0.36° pitch by revolving the internal reflective mirror at the speed of 30 ms/per revolution.

revolving_scanner

OTHER FUNCTIONS

Interference reduction function

The SZ Series has two scanning cycles, which makes it possible to reduce mutual interference between the SZs installed face-to-face.

Output connectable to either NPN/PNP

Regardless of the OSSD output type (NPN, PNP) being used, all non-safety outputs can be wired for either NPN or PNP operation depending on input device polarity.

For visitors who viewed this page

    Latest / Most Downloaded

      • Trade Shows and Exhibitions
      • eNews Subscribe

      More Series In Safety Laser Scanners

      Safety