Digital Fibre Optic SensorsFS-N series (FS-neo)

FS-N13CP

Fibre Amplifier, M8 Connector Type, Main Unit, PNP

SPECIFICATIONS

Select Language

Model

FS-N13CP

Type

High functionality 2 output
M8 connector*1

Output

PNP

Main unit/Expansion unit

Main unit

Control output

2
PNP open collector 24 V; 1 output max: 100 mA or less; 2 output total: 100 mA or less (used stand-alone)/20 mA or less (multiple connections); residual voltage 1 V or less

External input

-

Response time

50 μs (HIGH SPEED)/250 μs (FINE)/500 μs (TURBO)/1 ms (SUPER)/4 ms (ULTRA)/16 ms (MEGA)

Multiple connections to Expansion units

Up to 16 units can be connected total (two output type is treated as two units)

Light source

Red, 4-element LED

APC

ON/OFF switchable (Factory setting: OFF)

Number of interference prevention units

0 for HIGH SPEED; 4 for FINE; 8 for TURBO/SUPER/ULTRA/MEGA
(When set to double, the number of interference-prevention units will be doubled.)

Rating

Power voltage

12 - 24 V DC ±10% ripple (P-P) 10% or less

Current Consumption

Normal: 1050 mW or less (42 mA max. at 24 V, 56 mA max. at 12 V)*2
Eco on mode: 950 mW or less (38 mA max. at 24 V, 47 mA max. at 12 V)*2
Eco Full mode: 600 mW or less (24 mA max. at 24 V, 29 mA max. at 12 V)

Environmental
resistance

Operating ambient luminance

Incandescent lamp: 20000 lux or less; Sunlight: 30000 lux or less

Operating ambient temperature

-20 to +55 °C (no freezing)*3

Operating ambient humidity

35 to 85% RH (no condensation)

Vibration resistance

10 to 55 Hz Compound amplitude 1.5 mm, 2 hours for each of X,Y,Z axis

Shock resistance

500 m/s2 3 times for each of X,Y,Z axis

Case material

Both main unit and expansion unit housing material: Polycarbonate

Weight

Approx. 22 g

*1 Use a cable length of 30 m or less for M8 connector types.
*2 Increases 100 mW (4.0 mA) for High Speed mode
*3 One or two more units connected: -20 to +55°C; 3 to 10 more units connected: -20 to +50°C; 11 to 16 more units connected: -20 to +45°C. When using 2-outputs, one unit is counted as two units. All
temperature regulations are for when the unit is mounted on a DIN rail and installed on metal sheeting.

For visitors who viewed this page

    • For Beginners Sensor Basics Understanding fundamental - Introduction Guide to Sensors

    Fibre Unit Finder

    • Fibre Unit Finder

    Latest / Most Downloaded

      • Trade Shows and Exhibitions
      • eNews Subscribe

      Sensors