Digital Fibre Optic SensorsFS-V10 series

FS-V10

Fibre Amplifier, Zero-line Expansion Unit

SPECIFICATIONS

Select Language

Model

FS-V10

Type

0-line expansion unit

Output

NPN

Light source

Red LED

Response time

410 μs to 1.7 ms *1

Operation mode

LIGHT-ON/DARK-ON (switch-selectable)

Indicator lamp

Display indicator: Red LED
Digital LED monitor: Seven segments, four digits, red LED
Bar LED monitor: One orange LED and six green LEDs

Timer function

ON-delay: 40 ms /OFF-delay: 10 ms /Timer OFF (switch-selectable)

Control output

Protection circuit

Reversed polarity protection, over-current protection, surge absorber

Unit expansion

Up to 16 expansion units can be connected (a total of 17 units).*2

Mutual interference
suppression

FINE : 4, TURBO/SUPER: 8

Rating

Power voltage

12 to 24 VDC (±10%), ripple (p-p): 10% max.,Class 2 *3

Current consumption

50 mA max.

Environmental resistance

Operating ambientluminance

Incandescent lamp: 10000 lux max., Sunlight: 20000 lux max.

Operating ambient temperature

-10 to +55°C (no freezing)

Operating ambient humidity

35 to 85% RH (No condensation)

Vibration

10 to 55 Hz, double amplitude: 1.5 mm, 2 hours each in the X, Y and Z axis

Shock resistance

500 m/s2 in X, Y, and Z directions, 3 times respectively

Case material

Polycarbonate

Weight

Approx. 20 g

*1 The response speed varies depending on the number of expansion units connected.
*2 If more than one unit is used together, the ambient temperature varies with the conditions below. Mount the units on the DIN rail with mounting brackets and check that the output current is 20 mA or less.
3 to 10 Units: -10 to 50°C, 11 to 16 Units: -10 to 45°C
*3 Neither the FS-V12 nor the FS-V10 can be used as a standalone unit.

For visitors who viewed this page

    Fibre Unit Finder

    • Fibre Unit Finder

    Latest / Most Downloaded

      • Trade Shows and Exhibitions
      • eNews Subscribe

      Sensors