Digital Fibre Optic Sensors

FS-V30 series

Select Language

Model

NPN

FS-V31

FS-V32

FS-V31C

FS-V32C

FS-V33

FS-V34

FS-V33C

FS-V34C

PNP

FS-V31P

FS-V32P

FS-V31CP

FS-V32CP

FS-V33P

FS-V34P

FS-V33CP

FS-V34CP

Type

1-output with cable

1-output + 1-input
with M8 connector

2-output + 1-input with cable

2-output with
M8 connector

Main unit/Expansion unit

Main unit

Expansion unit

Main unit

Expansion unit

Main unit

Expansion unit

Main unit

Expansion unit

Control output

1 output

2 outputs

Monitor output (1 to 5 V)

N/A

External input

N/A

1 input

N/A

Connector

M8

M8

Light source

Red, 4-element LED (Wavelength: 640 nm)

Response time

33 μs (HIGH SPEED)/250 μs (FINE)/500 μs (TURBO)/1 ms (SUPER TURBO)/4 ms (ULTRA TURBO)/16 ms (MEGA TURBO)

Output selection

LIGHT-ON/DARK-ON (switch-selectable)

Display indicator

Operation indicator: Red LED/Dual digital monitor: Dual 7-segment display, Preset Value (4-digit green LED indicator) and
Current Value (4-digit red LED indicator) illuminated together. Current Value range: 0 to 64,512; Excess gain: 0P to 999P,
Hold function: Possible to display both peak and bottom hold values, Selectable from 5 variations
Bar LED monitor: Excess gain displayed (85% to 115% in 7 steps), Scaling display

Detection mode

Light intensity (area detection possible, automatic sensitivity-tracking function provided)

Light intensity (area detection possible, automatic sensitivity-tracking function provided)/
[Limited light intensity/Count check/Abnormality detection]

Timer function

OFF-delay timer/ON-delay timer/One-shot timer/ON-delay timer + OFF-delay timer/ON-delay timer + One-shot timer, selectable
Timer duration selectable: 0.1 ms to 9,999 ms, Maximum error against the setting value: ±10% max.

Control output

NPN

NPN open-collector 24 V, 100 mA max.*1 (main unit only)/20 mA max. (when the expansion unit(s) is connected), Residual voltage: 1 V max.

PNP

PNP open-collector 24 V, 100 mA max.*1 (main unit only)/20 mA max. (when the expansion unit(s) is connected), Residual voltage: 1 V max.

External inputy

Input time: 2 ms (ON)/20 ms (OFF) min.*2

Unit expansion

Up to 16 expansion units can be connected (a total of 17 units). Note that the 2-output type should be counted as two units.

Number of interference prevention units

Normal operation

HIGHSPEED:0 FINE:4 TURBO/SUPER/ULTRA/MEGA:8台

Size

30.3 mm (H) x 9.8 mm (W) x 71.8 mm (D)

Rating

Power voltage

12 to 24 VDC (±10%), ripple (p-p): 10% max., Class 2

Current consumption

NPN

Normal: 710 mW max. (Using 24 V, 29 mA max., using 12 V, 40 mA max.)/Power saving: 540 mW max. (Using 24 V, 22 mA max., using 12 V, 28 mA max.)*3

PNP

Normal: 750 mW max. (Using 24 V, 31 mA max., using 12 V, 40 mA max.)/
Power saving 580 mW max. (Using 24 V, 24 mA max., using 12 V,
28 mA max.)*3

830 mW max. (Using 24 V, 35 mA max., using 12 V, 45 mA max.)/
Power saving 660 mW max. (Using 24 V, 27 mA max., using 12 V,
32 mA max.)*3

830 mW max. (Using 24 V, 35 mA max., using 12 V, 45 mA max.)/
Power saving 660 mW max. (Using 24 V, 27 mA max., using 12 V,
32 mA max.)*5

830 mW max. (Using 24 V, 35 mA max., using 12 V, 45 mA max.)/
Power saving 660 mW max. (Using 24 V, 27 mA max., using 12 V,
32 mA max.)*3

Environmental resistance

Operating ambientluminance

Incandescent lamp: 20,000 lux max., Sunlight: 30,000 lux max.

Operating ambient temperature

-10 to +55°C (14 to 131°F), No condensation*4

Operating ambient humidity

35 to 85% RH (No condensation)

Shock resistance

500 m/s2 in X, Y, and Z directions, 3 times respectively

Vibration

10 to 55 Hz, double amplitude: 1.5 mm , 2 hours each in the X, Y and Z axis

Case material

Polycarbonate

Accessories

N/A

Weight

Approx 80 g

Approx 45 g

Approx 22 g

Approx 80 g

Approx 70 g

Approx 22 g

*1 Total current of two outputs should be less than 100 mA.
*2 Only available on certain models.
*3 When using the HIGH SPEED mode, the power consumption increases by 160 mW (7 mA).
*4 If more than one unit is used together, the ambient temperature varies with the conditions below. Mount the units on the DIN rail with mounting brackets and check that the output current is 20 mA or less.
1 to 2 Units: -10 to +55°C (14 to 131°F), 3 to 10 Units: -10 to +50°C (14 to 122°F), 11 to 16 Units: -10 to +45°C (14 to 113°F)
*5 4

Model

NPN

FS-V31M

FS-V30

Type

Monitor output

0-line

Main unit/Expansion unit

Main unit

Expansion unit

Control output

1 output

N/A

Monitor output (1 to 5 V)

1 output
Voltage output: 1 to 5 V*1, Load resistance: 10 kΩ min., Repeatability: ±0.5% of F.S., Response time: 1 ms

External input

N/A

Connector

Light source

Red, 4-element LED (Wavelength: 640 nm)

Response time

33 μs (HIGH SPEED)/250 μs (FINE)/500 μs (TURBO)/1 ms (SUPER TURBO)/4 ms (ULTRA TURBO)/16 ms (MEGA TURBO)

193 μs to 16.7 ms

Output selection

LIGHT-ON/DARK-ON (switch-selectable)

Display indicator

Operation indicator: Red LED/Dual digital monitor: Dual 7-segment display, Preset Value (4-digit green LED indicator) and
Current Value (4-digit red LED indicator) illuminated together. Current Value range: 0 to 64,512; Excess gain: 0P to 999P,
Hold function: Possible to display both peak and bottom hold values, Selectable from 5 variations
Bar LED monitor: Excess gain displayed (85% to 115% in 7 steps), Scaling display

Detection mode

Light intensity (area detection possible, automatic sensitivity-tracking function provided)

Timer function

OFF-delay timer/ON-delay timer/One-shot timer/ON-delay timer + OFF-delay timer/ON-delay timer + One-shot timer, selectable
Timer duration selectable: 0.1 ms to 9,999 ms, Maximum error against the setting value: ±10% max.

Control output

NPN

NPN open-collector 24 V, 100 mA max.*2 (main unit only)/20 mA max. (when the expansion unit(s) is connected), Residual voltage: 1 V max.

External inputy

Input time: 2 ms (ON)/20 ms (OFF) min.*3

Unit expansion

Up to 16 expansion units can be connected (a total of 17 units). Note that the 2-output type should be counted as two units.

Number of interference prevention units

Normal operation

HIGHSPEED:0 FINE:4 TURBO/SUPER/ULTRA/MEGA:8台

Size

30.3 mm (H) x 9.8 mm (W) x 71.8 mm (D)

Rating

Power voltage

12 to 24 VDC (±10%), ripple (p-p): 10% max., Class 2

Current consumption

NPN

-

Environmental resistance

Operating ambientluminance

Incandescent lamp: 20,000 lux max., Sunlight: 30,000 lux max.

Operating ambient temperature

-10 to +55°C (14 to 131°F), No condensation*4

Operating ambient humidity

35 to 85% RH (No condensation)

Shock resistance

500 m/s2 in X, Y, and Z directions, 3 times respectively

Vibration

10 to 55 Hz, double amplitude: 1.5 mm , 2 hours each in the X, Y and Z axis

Case material

Polycarbonate

Accessories

N/A

Weight

Approx 80 g

Approx 25 g

*1 2
*2 Total current of two outputs should be less than 100 mA.
*3 Only available on certain models.
*4 If more than one unit is used together, the ambient temperature varies with the conditions below. Mount the units on the DIN rail with mounting brackets and check that the output current is 20 mA or less.
1 to 2 Units: -10 to +55°C (14 to 131°F), 3 to 10 Units: -10 to +50°C (14 to 122°F), 11 to 16 Units: -10 to +45°C (14 to 113°F)

For visitors who viewed this page

    Fibre Unit Finder

    • Fibre Unit Finder

    Latest / Most Downloaded

      • Trade Shows and Exhibitions
      • eNews Subscribe

      Sensors