Manual-Calibration Fibreoptic SensorFS-V/T/M series (FS01)

FS-R0

Wiring-saving Connector Unit

[Discontinued model]

This model has been discontinued.

To contact us:

SPECIFICATIONS

Select Language

Model

FS-R0

Response time

410 µs to 1.2 ms 2*1

Expandable inputs

16 (15 when using stability output)

Number of outputs

16

Control output

NPN open-collector 50 mA max. (40 V max.) Residual voltage: 1 V max.

Protection circuit

Reversed polarity protection, Overcurrent protection, Surge absorber

Rating

Power voltage

12 to 24 VDC ±5 %, Ripple (P-P) 5 % or less*2

Current consumption

20 mA or less, plus current consumed by expansion units connected

Environmental resistance

Ambient temperature

-10 to +50 °C (No freezing)*3

Relative humidity

35 to 85 % RH (No condensation)

Vibration resistance

10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions

Shock resistance

500 m/s2, 3 times in each of the X, Y, and Z directions

Case material

Polycarbonate

Weight

Approx. 150 g

*1 The response speed varies depending on the number of expansion units connected.
*2 Change the supply voltage to meet the requirement of the input device (PLC, etc.).
*3 If more than one unit is used together, the ambient temperature varies with the conditions below. Mount the units on the DIN rail with mounting brackets and check that the output current is 20 mA or less.
1 to 10 Units: -10 to +50 °C, 11 to 16 Units: -10 to +45 °C.

For visitors who viewed this page

    Fibre Unit Finder

    • Fibre Unit Finder

    Latest / Most Downloaded

      • Trade Shows and Exhibitions
      • eNews Subscribe

      Sensors