Amplifier Separate Type Photoelectric SensorPS-N series

PS-N10

Amplifier Unit, Zero-line Expansion Unit

SPECIFICATIONS

Select Language

Model

PS-N10

Type

Zero line

Output

-

Main unit/Expansion unit

Expansion unit

I/O

Control outputs

None*1

External input

None

Response time

500 μs (TURBO)/1 ms (SUPER)/4 ms (ULTRA)/16 ms (MEGA)

Output selection

LIGHT-ON/DARK-ON (switch-selectable)

Timer function

Timer OFF/OFF-delay timer/ON-delay timer/One-shot timer, Timer duration selectable: 1 ms to 9999 ms, Maximum error against the setting value: ±10% max.

Control output

External input

Input time 2 ms (ON)/20 ms (OFF) or more*2

Unit expansion

Up to 17 main units can be connected

Protection circuit

Reverse polarity protection, Over-current protection, Surge absorber

Number of interference prevention units

4 for TURBO/SUPER/ULTRA/MEGA (When set to DOUBLE, the number of interference-prevention units will be doubled)

Case size

H 32.6 mm × W 9.8 mm × L 78.7 mm

Rating

Power voltage

24 VDC (operating voltage 10-30 VDC (with ripple)), ripple (P-P) 10% or less, Class 2 or LPS

Power consumption

Normal: 810 mW or less (at 30V. 28 mA max. at 24 V, 34 mA max. at 12 V)
Eco on mode: 700 mW or less (at 30V. 24 mA max. at 24 V, 27 mA max. at 12 V) Eco Full mode: 490 mW or less (at 30V. 17 mA max. at 24 V, 20 mA max. at 12 V)

Ambient temperature

-20°C to +55°C (No freezing)*3

Relative humidity

35 to 85% RH (No condensation)

Environmental resistance

Vibration

10 to 55 Hz, double amplitude: 1.5 mm , 2 hours each in the X, Y and Z axis

Shock resistance

500 m/s2 3 times for each of X,Y and Z axis

Material

Case

Main unit and cover material: Polycarbonate

Cable

PVC

Weight

Approx 20 g

*1 Counted as one output when added to a NU Series communication unit.
*2 Input time is 25 ms (ON)/25 ms (OFF) when the external calibration time is selected.
*3 If more than one unit is used together, the ambient temperature varies with the conditions below. Mount the units on the DIN rail with mounting brackets and check that the output
current is 20 mA or less for a uni t .
One or two more units connected: -20°C to +55°C ; 3 to 10 more units connected: -20°C to +50°C; 11 to 16 more units connected: -20°C to +45°C .

For visitors who viewed this page

    • For Beginners Sensor Basics Understanding fundamental - Introduction Guide to Sensors

    Latest / Most Downloaded

      • Trade Shows and Exhibitions
      • eNews Subscribe

      Sensors