Built-in amplifier photoelectric sensorsPZ series

PZ-61P

Square retro-reflective Cable Type, PNP

SPECIFICATIONS

Select Language

Model

PZ-61P

Type

Retro-reflective model, straight model

Detecting distance

0.1 to 2.5 m (when reflector R-1 is used)

Light source

Infrared LED

Detectable object

Opaque material with an area of 30 mm2 or more

Hysteresis

Sensitivity adjustment

1-turn trimmer (240°)

Response time

1 ms max. (2 ms in alternate frequency mode)

Operation mode

LIGHT-ON/DARK-ON (switch-selectable)

Indicator lamp

Output: red LED, stable operation: green LED

Output

Controloutput

Maximum PNP open-collector output: 100 mA or less (40 V or less)

Stability output

Protection circuit

Reversed polarity, overcurrent protection, surge absorber

Rating

Power voltage

12 to 24 VDC ± 10%, ripple (P-P): 10% or less

Current consumption

30mA or less

Environmental resistance

Enclosure rating

IP67

Operating ambientluminance

Incandescent lamp: 5,000 lux or less, sunlight: 20,000 lux or less

Operating ambient temperature

-20 to +55°C, No condensation

Operating ambient humidity

35 to 85%RH

Vibration

10 to 55 Hz compound amplitude 1.5 mm, 2 hours for each of X, Y, Z axis

Case material

Fibreglass reinforced plastic

Weight

Approx 75 g (including 2-m 6.6' cable)

For visitors who viewed this page

    • For Beginners Sensor Basics Understanding fundamental - Introduction Guide to Sensors

    Latest / Most Downloaded

      • Trade Shows and Exhibitions
      • eNews Subscribe

      Sensors