Laser Thrubeam SensorIB series

IB-1000

Amplifier Unit, DIN Rail Type

SPECIFICATIONS

Select Language

Model

IB-1000

Type

DIN rail mount

Main unit/Expansion unit

Main unit

Head compatibility

Yes

Display

Display resolution

0.01%, 0.1%, 1% (switchable)

Display range

–99.999 to 99.999, –99.99 to 99.99, –99.9 to 99.9, –99 to 99 (switchable)

Digital display method

Dual 7-segment display
Upper level:5 red digits
Lower level: 5 green digits

Operation indicator

Judgment indicator: 2-colour (green/red) LED (HI, GO, LO),
Bank indicator: Green LED x 4,
Laser emission warning indicator: Green LED,
Others: Green LED x 8, red LED x 3

Analogue output voltage

±5 V, 1 to 5 V, 0 to 5 V Output impedance 100Ω*1

Analogue current output

4 to 20 mA Maximum load resistance 350Ω*1

Control Input

Bank switch input, zero shift input

Non-voltage input*2

Control input

Zero-shift input

Laser emission stop input

Timing input

Reset input

Adjust input

Control output

Judgment output (check output)

Open collector (NPN/PNP switchable, N.O./N.C. switchable)*3

Power supply

Power consumption

1950 mW or less
(at 30 V, 65 mA max.)*4

Rating

Power voltage

10 to 30 VDC, including Ripple (P-P) 10 %, Class 2 or LPS

Environmental resistance

Pollution degree

2

Ambient temperature

-10 to +50 °C (No condensation or freezing)

Relative humidity

35 to 85 % RH (No condensation)

Vibration resistance

10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z axis

Material

Case/Front panel: polycarbonate, keytop: polyacetal, cable: PVC

Weight

Approx. 150 g

*1 ±5 V, 1 to 5 V, 0 to 5 V, or 4 - 20 mA should be selected.
*2 The four external input wires are assigned with desired inputs.
Rated no-voltage input: ON voltage 2 V or less, OFF current 0.05 mA or less
Rated voltage input: Max. input rating 30 V or less, ON voltage 7.5 V or more, OFF current 0.05 mA or less
*3 Rated NPN open collector output: Max. 50 mA/ch (20 mA/ch when expansion units are connected), 30 V or less, residual voltage 1 V or less
Rated PNP open collector output: Max. 50 mA/ch (20 mA/ch when expansion units are connected), 30 V or less, residual voltage 2 V or less
*4 The power consumption with slave units installed is the total of each amplifier unit's power consumption.
Example: When using one master unit (IB-1000) with two slave units (IB-1050) (1950 mW x 1) + (1950 mW x 2) = 5850 mW

For visitors who viewed this page

    • For Beginners Sensor Basics Understanding fundamental - Introduction Guide to Sensors

    Sensor Library

    Latest / Most Downloaded

      • Trade Shows and Exhibitions
      • eNews Subscribe

      Sensors