Controller IM-8000

IM-8000 - Controller

*Please note that accessories depicted in the image are for illustrative purposes only and may not be included with the product.

Data Sheet (PDF)

View Catalogue

Data Sheet (PDF)

Specifications

Model				IM-8000
Type				Controller
Image sensor				1" 20-megapixel monochrome CMOS
Display				12.1" LCD monitor (WXGA: 1280 × 800)
Receiver lens				Double telecentric lens
Image measurement	Field of view	Wide-field measurement mode		IM-8005: ø100 mm IM-8020: 200 × 200 mm (4× R50) IM-8030: 300 × 200 mm (4× R50)
		High-precision measurement mode		IM-8005: 25 × 25 mm IM-8020: 125 × 125 mm IM-8030: 225 × 125 mm
	Minimum display unit			0.1 μm
	Repeatability	Wide-field measurement mode	Without stage movement	±1 μm
			With stage movement	IM-8005: — IM-8020: ±2 μm IM-8030: ±2 μm
		High-precision measurement mode	Without stage movement	±0.5 μm
			With stage movement	IM-8005: — IM-8020: ±1.5 μm IM-8030: ±1.5 μm
	Measurement accuracy (±2σ)	Wide-field measurement mode	Without binding	±3.9 μm ^*1
			With binding	IM-8005: — IM-8020: ±(7 + 0.02 L) μm ^2 IM-8030: ±(7 + 0.02 L) μm ^3
		High-precision measurement mode	Without binding	±2 μm ^*4
			With binding	IM-8005: — IM-8020: ±(4 + 0.02 L) μm ^5 IM-8030: ±(4 + 0.02 L) μm ^6
	Outer diameter measurement	Measurement accuracy	Wide-field measurement mode	IM-8005: ±(2.8 + 0.02 D) μm ^7 IM-8020: ±(2.8 + 0.02 D) μm ^8 IM-8030: ±(2.8 + 0.02 D) μm ^*9
			High-precision measurement mode	IM-8005: ±(1.4 + 0.04 D) μm ^10 IM-8020: ±(1.4 + 0.04 D) μm ^11 IM-8030: ±(1.4 + 0.04 D) μm ^*12
Light probe measurement	Measurable area (XY)			IM-8005: — IM-8020: 90 × 90 mm IM-8030: 190 × 90 mm
	Maximum measurement depth			IM-8005: — IM-8020: 30 mm IM-8030: 30 mm
	Light probe diameter			IM-8005: — IM-8020: ø3 mm IM-8030: ø3 mm
	Measuring force			IM-8005: — IM-8020: 0.015 N IM-8030: 0.015 N
	Repeatability			IM-8005: — IM-8020: ±2 μm ^13 IM-8030: ±2 μm ^13
	Measurement accuracy			IM-8005: — IM-8020: ±(8 + 0.02 L) μm ^14 IM-8030: ±(8 + 0.02 L) μm ^15
External remote input				Non-voltage input (with and without contact)
External output	OK/NG/FAIL/MEAS.			PhotoMos output Rated load: 24 VDC 0.5 A ON resistance: 50 mΩ or lower
Interface	LAN			RJ-45 (10BASE-T/100BASE-TX/1000BASE-T)
	USB 3.1			4 ports (rear: 4)
	USB 2.0 series A			4 ports (front: 2, rear: 2)
	Monitor output			DVI-D
Record	Hard disk drive			500 GB
Illumination system	Transparent			Telecentric transparent illumination
	Ring			IM-8005: Four division ring illumination IM-8020: Four division, multi-angle illumination (electric), Slit ring (directivity) illumination (electric) IM-8030: Four division, multi-angle illumination (electric), Slit ring (directivity) illumination (electric)
XY stage	Moving range			IM-8005: — IM-8020: 100 × 100 mm (electric) IM-8030: 200 × 100 mm (electric)
	Withstand load			IM-8005: 5 kg IM-8020: 5 kg IM-8030: 7.5 kg
Z stage	Moving range			75 mm (electric)
Power supply	Power voltage			100 to 240 VAC ±10%, 50/60 Hz
	Power consumption			430 VA or lower
Environmental resistance	Ambient temperature			+10 to 35°C
	Relative humidity			20 to 80% RH (no condensation)
	Overvoltage category			II
	Pollution degree			2
Weight				Approx. 8 kg
^1 In the range of ø80 mm, within the operating ambient temperature range of +23 ±1°C at the focal point position. ^2 In the range of 180 × 180 mm (4× R40), within the operating ambient temperature range of +23 ±1°C at the focal point position, and with a load weighing 2 kg or less on the stage. L is the amount of stage movement (in mm). ^3 In the range of 280 × 180 mm (4× R40), within the operating ambient temperature range of +23 ±1°C at the focal point position, and with a load weighing 3 kg or less on the stage. L is the amount of stage movement (in mm). ^4 In the range of ø20 mm, within the operating ambient temperature range of +23 ±1°C at the focal point position. ^5 In the range of 120 × 120 mm, within the operating ambient temperature range of +23 ±1°C at the focal point position, and with a load weighing 2 kg or less on the stage. L is the amount of stage movement (in mm). ^6 In the range of 220 × 120 mm, within the operating ambient temperature range of +23 ±1°C at the focal point position, and with a load weighing 3 kg or less on the stage. L is the amount of stage movement (in mm). ^7 Within the range of L18 mm × ø60 mm. At the focal point position, with the part positioned in the centre of the lens field of view, and with the shaft direction of the part facing the horizontal direction of the lens field of view. Within the operating ambient temperature range of +23 ±1°C. D is the Y direction distance (in mm). ^8 Within the range of L118 mm × ø60 mm. At the focal point position, with the part positioned in the centre of the lens field of view, and with the shaft direction of the part facing the horizontal direction of the lens field of view. Within the operating ambient temperature range of +23 ±1°C. D is the Y direction distance (in mm). ^9 Within the range of L218 mm × ø60 mm. At the focal point position, with the part positioned in the centre of the lens field of view, and with the shaft direction of the part facing the horizontal direction of the lens field of view. Within the operating ambient temperature range of +23 ±1°C. D is the Y direction distance (in mm). ^10 Within the range of L6 mm × ø20 mm. At the focal point position, with the part positioned in the centre of the lens field of view, and with the shaft direction of the part facing the horizontal direction of the lens field of view. Within the operating ambient temperature range of +23 ±1°C. D is the Y direction distance (in mm). ^11 Within the range of L106 mm × ø20 mm. At the focal point position, with the part positioned in the centre of the lens field of view, and with the shaft direction of the part facing the horizontal direction of the lens field of view. Within the operating ambient temperature range of +23 ±1°C. D is the Y direction distance (in mm). ^12 Within the range of L206 mm × ø20 mm. At the focal point position, with the part positioned in the centre of the lens field of view, and with the shaft direction of the part facing the horizontal direction of the lens field of view. Within the operating ambient temperature range of +23 ±1°C. D is the Y direction distance (in mm). ^13 When the detection system is standard. If the detection system is at a deep position, ±3 μm. ^14 When the detection system is standard, within the operating ambient temperature range of +23 ±1°C, and with a load weighing 2 kg or less on the stage. If the detection system is at a deep position, ±(10 + 0.02 L) μm with L as the measurement length (in mm). ^*15 When the detection system is standard, within the operating ambient temperature range of +23 ±1°C, and with a load weighing 3 kg or less on the stage. If the detection system is at a deep position, ±(10 + 0.02 L) μm with L as the measurement length (in mm).

Data Sheet (PDF) Other Models