Recent Searches
    Series ()
      Models ()

          High-speed, High-Accuracy, digital inductive displacement sensors EX-V series


          Amplifier Unit NPN


          Select Language




          Amplifier Unit NPN


          14 x 30 x 4.8 mm Thin profile

          Measuring range

          0 to 4 mm

          A/D converting system

          Display range

          -19999 to +19999


          ±0.3% of F.S.

          Resolution (No. of averaging
          measurements: 64)

          1 µm

          Sampling rate

          40000 samplings max./sec. *2

          Display speed

          20 times/sec.

          Display power

          7-segment 2-colour LED

          Over-range alarm

          ±FFFF is displayed.

          Control input

          Timing input

          NPN open-collector or non-voltage contact signal

          Reset input

          Auto-zero input

          Judgment output: Inhibit input

          Synchronization/external settings input

          Control output

          NPN open-collector or non-voltage contact (Timing input, Reset input, Auto-zero input, Comparator output disable input,
          Synchronous input, External setting input)


          Setting method

          Upper/lower 2-level setting x 4 patterns (selectable)

          Control output


          NPN open-collector (HIGH, GO and LOW): 100 mA max. (40 V max.)


          Response time

          0.075 ms (at maximum speed)

          OFF-delay time

          60 ms (ON/OFF selectable)

          Strobe output

          NPN: 100 mA max. (40 V max.), Residual voltage: 1 V max. (N.O.)

          Control output

          Alarm output

          NPN: 100 mA max. (40 V max.), Residual voltage: 1 V max. (N.C.)

          Analogue output voltage

          Output voltage



          100 Ω

          Response time

          0.075 ms (at maximum speed)

          Temperature characteristics

          0.07% of F.S./°C *3

          Major functions

          FLL, digital filter, auto zero, offset, calculation, measurement mode (15 types), judgment value memory (4 sets), decimal point shift, display digit changing, display of various errors, etc.


          Power voltage

          24 VDC ±10 %, Ripple (P-P) 10 % or less

          Current consumption

          240 mA or less

          Environmental resistance

          Ambient temperature

          0 to +50 °C

          Relative humidity

          35 to 85 % RH (No condensation)

          Vibration resistance

          10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions


          Approx. 235 g

          *1 The above data was obtained using an iron target (S45C, SS400, t=1 mm). When measuring aluminium, copper, or stainless steel targets, refer to the linear characteristics for these materials.
          *2 When the digital filter function is used, the sampling rate is 20000 sampling/sec.
          *3 When the distance between the sensor head and the target is within 50% of the measuring range.

          Measurement Library

          Measurement Sensors