Recent Searches
    Series ( results)
      Models ( results)
        Keywords

          Clamp-on Micro Flow SensorFD-X series

          FD-XS1E

          Sensor head Maximum rated flow rate 1 L/min

          SPECIFICATIONS

          Select Language

          Model

          FD-XS1E

          Supported pipe materials

          Metal pipes, Plastic pipes (soft/hard) *1

          Supported fluids

          Liquids (water, oil, adhesive, grease, chemical solution, etc.) *1

          Supported fluid temperature

          0 °C (no freezing on the pipe surface) to 100 °C (Pipe surface temperature)

          Clamp set model

          Plastic pipe/tube attachment

          FD-XC1R1, FD-XC1R2

          Metal pipe attachment

          FD-XC1M

          Maximum rated flow rate

          1000 mL/min

          Zero cut flow rate

          50 mL/min*2 (variable, default)

          Display resolution

          Instantaneous flow rate

          1/10 mL/min (Displayed on controller)

          Repeatability

          Response time 50 ms: ±20 % of RD
          Response time 500 ms: ±15 % of RD

          Hysteresis

          Variable

          Display method

          Status indicator

          Environmental resistance

          Enclosure rating

          IP65/IP67 (IEC60529) , IP68G (JIS C0920) *3

          Operating ambient temperature

          0 to 60 °C (No freezing)

          Operating ambient humidity

          35 % to 85 %RH (No condensation)

          Vibration resistance

          10 to 55 Hz, double amplitude 1.5 mm, 2 hours each for X,Y,Z direction

          Shock resistance

          50 G 11 ms, 3 times each for X,Y,Z direction

          Material

          Sensor head

          Head body: PPS/PPSU, relay amplifier: PPS, cable:PVC, controller connector: PPS/PBT/POM

          Clamp set

          For plastic pipe

          Body, fixing screw: PPS, detection surface: special rubber, pipe support rubber: FKM, sensor head fixing screw: SUSXM7

          For metal pipe

          Metal: SUS304/SUSXM7, detection surface: special rubber, clamp support rubber: FKM, sensor head fixing screw: SUSXM7

          Weight

          Approx. 230 g

          *1 Liquid must allow for the passage of an ultrasonic pulse, as well as not contain large air pockets or excessive bubbles. Readings may become unstable depending on the type of pipe.
          *2 The zero cut flow rate can be changed in the settings. When using the unit with a low flow rate range, perform an origin adjustment when the fluid is not moving if you change the zero cut flow rate.
          *3 The connector part of the sensor head cable is IP65/IP67.

          Process Controls / Process Sensors