Amplifier Unit, Expansion Unit, PNP AP-V42P

Model

AP-V42P

Type

Amplifier Unit, PNP

Set and display range

-15 to +110 % of F.S.

Display

4 1/2-digit, 2-colour, 7-segment LED (Character height: 4.5 mm), AI indicator (green), Display cycle: 10 times/s

Operation indicator

Red LED x 2 (corresponding to control output 1 and 2)

Repeatability

±0.2 % of F.S. or less

Display resolution

AP-41M/41: Standard mode 0.1 kPa, High-resolution/Focus mode 0.01 kPa
AP-43: Standard mode 0.001 MPa, High-resolution/Focus mode 0.1 kPa
AP-44/48: Standard mode 0.1 kPa, High-resolution/Focus mode 0.02 kPa

Power consumption

Normal

12 V: 720 mW (60 mA) max., 24 V: 960 mW (40 mA) max.

Display temperature characteristic

±1 % of F.S. or less

Hysteresis

Variable (0.5 % of F.S. in standard or high-speed mode, 0.1 % of F.S. in high-resolution mode)

Response time (Chattering prevention function)

1/2.5/5/100/500 ms (selectable)^*1

I/O

Analogue output

1 to 5 V with load impedance of 1 kΩ max. (or zero-shift input selectable)^*2

Zero-shift input

Input time: 2 ms or more (or analog output selectable)

Control output

Maximum PNP open-collector output: 100 mA (30 V or less), residual voltage: 1 V or less, 2 outputs (N.O./N.C. switchable)

Rating

Power voltage

12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less

Power consumption

Eco mode

12 V: 480 mW (40 mA) max., 24 V: 720 mW (30 mA) max.

Environmental resistance

Ambient temperature

0 to +50 °C (No freezing)

Relative humidity

35 to 85 % RH (No condensation)

Vibration resistance

10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions

Material

Polycarbonate

Accessories

End Unit，Head Connector, and Expansion Seal

Weight

Approx. 80 g (with 2 m cable)