Linear cylinder sensor Gripper model C-shaped slot 30 ㎜ PNP M8 connector CS-LGS30PC

Name: Linear cylinder sensor Gripper model C-shaped slot 30 ㎜ PNP M8 connector - CS-LGS30PC
Brand: KEYENCE

CS-LGS30PC - Linear cylinder sensor Gripper model C-shaped slot 30 ㎜ PNP M8 connector

*Please note that accessories depicted in the image are for illustrative purposes only and may not be included with the product.

Specifications

Model		CS-LGS30PC
Type	Sensor type	Linear cylinder sensor Gripper model
	Supported slot shape	SMC C-shaped slot ^*1
	Cable type	PNP M8 connector ^*2
Cylinder sensor	Sensor size	30 mm
	Detection length
	Minimum detectable magnetic flux density	2 mT
	Max. supported speed	1 m/s
	Resolution	0.01 mm
	Repeatability	±0.1 mm ^*3
	Linearity (reference value)	±0.3 mm
	Detection cycle	1 ms ^*4
Impact monitoring function		None
Display method		Indicator
Number of outputs	When using just the sensor	2
	When connected to IO-Link or the SP-N/V Series	4
Control output		Open-collector output: 30 VDC or less, 50 mA total for 2 outputs, Residual voltage: 2.5 V or less ^*5
Network function		IO-Link (Specification v1.1/COM3)
Power supply	Power voltage	18 to 30 VDC, ripple included, Class 2 or LPS
	Power consumption	510 mW (21 mA or less at 24 V/27 mA or less at 18 V [excluding load current]) ^*6
Environmental resistance	Enclosure rating	IP65/IP67 (IEC 60529)
	Protection circuit	Reverse polarity protection, Output overcurrent protection
	Ambient temperature	-20 to +60°C (no freezing)
	Relative humidity	Up to 85% RH (no condensation)
	Vibration resistance	10 to 500 Hz; Power spectral density: 0.816 G²/Hz; X, Y, and Z directions
	Shock resistance	100 m/s² (10 G); 1000 times each for X, Y, and Z axes
Material		Aluminium alloy, SUS304, PBT
Weight		Approx. 10 g
^1 For cylinders other than C/T-shaped slot types, installation may be possible by using optional brackets (sold separately). The slot shape and size may vary depending on the cylinder manufacturer, cylinder type, and release date. Verify installation is possible before purchasing. ^2 Switching to NPN is possible when using a high-functionality amplifier. ^3 This value is guaranteed by KEYENCE inspection facilities. Measurement errors may occur depending on the installation environment, such as the cylinder used. ^4 The default response time is 5 ms. The response time can be set as fast as 3 ms when using a high-functionality amplifier, panel, or IO-Link. When used with a high-functionality amplifier, the cylinder response time increases by up to +13 ms. ^5 Ensure the cable length is 30 m or less for the PNP M8 connector type. Ensure the cable length is 20 m or less when connecting via IO-Link. ^6 Including load current: 77 mA or less.

Data Sheet (PDF) Other Models