Recent Searches
    Series ()
      Models ()
        Keywords

          Digital Fibre Optic SensorsFS-V30 series

          FS-V32C

          Fibre Amplifier, M8 Connector Type, Expansion Unit, NPN

          SPECIFICATIONS

          Select Language

          Model

          FS-V32C

          Type

          1-output + 1-input
          with M8 connector

          Output

          NPN

          Main unit/Expansion unit

          Expansion unit

          Control output

          1 output

          Monitor output (1 to 5 V)

          N/A

          External input

          1 input

          Connector

          M8

          Light source

          Red, 4-element LED (Wavelength: 640 nm)

          Response time

          33 µs (HIGH SPEED) /250 µs (FINE) /500 µs (TURBO) /1 ms (SUPER TURBO) /4 ms (ULTRA TURBO) /16 ms (MEGA TURBO)

          Output selection

          LIGHT-ON/DARK-ON (switch-selectable)

          Display indicator

          Operation indicator: Red LED/Dual digital monitor: Dual 7-segment display, Preset Value (4-digit green LED indicator) and
          Current Value (4-digit red LED indicator) illuminated together. Current Value range: 0 to 64,512; Excess gain: 0P to 999P,
          Hold function: Possible to display both peak and bottom hold values, Selectable from 5 variations
          Bar LED monitor: Excess gain displayed (85% to 115% in 7 steps), Scaling display

          Detection mode

          Light intensity (area detection possible, automatic sensitivity-tracking function provided)

          Timer function

          OFF-delay timer/ON-delay timer/One-shot timer/ON-delay timer + OFF-delay timer/ON-delay timer + One-shot timer, selectable
          Timer duration selectable: 0.1 ms to 9,999 ms, Maximum error against the setting value: ±10% max.

          Control output

          NPN open-collector 24 V, 100 mA max.*1 (main unit only)/20 mA max. (when the expansion unit(s) is connected), Residual voltage: 1 V max.

          External inputy

          Input time: 2 ms (ON)/20 ms (OFF) min.*2

          Unit expansion

          Up to 16 expansion units can be connected (a total of 17 units). Note that the 2-output type should be counted as two units.

          Number of interference prevention units

          Normal operation

          HIGHSPEED:0 FINE:4 TURBO/SUPER/ULTRA/MEGA:8台

          Size

          30.3 mm (H) x 9.8 mm (W) x 71.8 mm (D)

          Rating

          Power voltage

          12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less

          Power consumption

          Normal: 710 mW max. (Using 24 V, 29 mA max., using 12 V, 40 mA max.)/Power saving: 540 mW max. (Using 24 V, 22 mA max., using 12 V, 28 mA max.)*3

          Environmental resistance

          Ambient light

          Incandescent lamp: 20,000 lux max., Sunlight: 30,000 lux max.

          Ambient temperature

          -10 to +55 °C (No freezing)*4

          Relative humidity

          35 to 85 % RH (No condensation)

          Vibration resistance

          10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions

          Shock resistance

          500 m/s2, 3 times in each of the X, Y, and Z directions

          Case material

          Polycarbonate

          Accessories

          N/A

          Weight

          Approx. 22 g

          *1 Total current of two outputs should be less than 100 mA.
          *2 Only available on certain models.
          *3 When using the HIGH SPEED mode, the power consumption increases by 160 mW (7 mA).
          *4 If more than one unit is used together, the ambient temperature varies with the conditions below. Mount the units on the DIN rail with mounting brackets and check that the output current is 20 mA or less.
          1 to 2 Units: -10 to +55 °C, 3 to 10 Units: -10 to +50 °C, 11 to 16 Units: -10 to +45 °C

          Fibre Unit Finder

          • Fibre Unit Finder
          • Trade Shows and Exhibitions
          • eNews Subscribe

          Sensors