Recent Searches
    Series ( results)
      Models ( results)
        Keywords
          1. Home
          2. Products
          3. Sensors
          4. Laser Sensors
          5. Digital Laser Sensor
          6. Models
          7. Amplifier Unit, Expansion Unit, PNP

          Digital Laser SensorLV series

          Amplifier Unit, Expansion Unit, PNP

          LV-52P

          [Discontinued model]

          This model has been discontinued.

          Recommended Replaceable Products
          To contact us:

          SPECIFICATIONS

          Select Language

          Model

          LV-52P

          Type

          PNP output

          Main unit/Expansion unit

          Expansion unit (1 line)

          Control output

          PNP open-collector x 2 channels, 30 VDC max., 100 mA, max. residual voltage (1.0 V max.)

          Response speed

          FINE : 80 µs , TURBO : 500 µs , SUPER : 4 ms

          Number of interference
          preventive units

          FINE : No device (0) , TURBO : 2 units , SUPER : 4 units*1

          Detection mode

          Light intensity distinction / edge detection

          Protection circuit

          Reversed polarity protection, over-current protection, surge absorber

          Unit expansion

          Up to 7 additional expansion units can be installed (8 units including the main unit),

          Rating

          Power voltage

          12 to 24 VDC, Ripple (P-P) 10 % or less (For the LV-52/52P, the power supply voltage is supplied from the main unit.)

          Power consumption

          1.5 W max. (125 mA max. for 12 V, 62.5 mA max. for 24 V)

          Environmental resistance

          Ambient temperature

          -10 to +55 °C (No freezing)*2

          Relative humidity

          35 to 85 % RH (No condensation)

          Material

          Main unit

          Polycarbonate

          Case

          Weight

          Approx. 75 g

          *1 To connect several units they must be mounted on a METAL DIN rail. Ensure that the output current is 20 mA max. With several units connected, the allowable ambient temperature range varies as follows : <return , >When 2 to 5 expansion units are additionally installed : -10 to +50ºC (14 to 122ºF).<return , >When 6 or 7 expansion units are additionally installed : -10 to +45ºC (14 to 113ºF).
          *2 When extended, the ambient usage temperature varies according to the following conditions. Be sure to mount units on a DIN rail (attached to a metal plate) and ensure that the output current is 20 mA or less. When extended

          • Trade Shows and Exhibitions
          • eNews Subscribe

          Back to top

          KEYENCE INTERNATIONAL (BELGIUM) NV/SA Bedrijvenlaan 5, 2800 Mechelen, Belgium
          Phone: +32 (0) 15 281 222
          Fax: +32 (0) 15 201 623
          E-mail: info@keyence.eu
          Career Opportunities: KEYENCE Career Site

          Sensors