Recent Searches
    Series ()
      Models ()
        Keywords

          Self-Contained Full-Spectrum SensorLR-W series

          LR-W500

          Cable type

          SPECIFICATIONS

          Select Language

          Model

          LR-W500

          Type

          2 m cable type

          Detecting distance

          30 to 500 mm

          Min. spot diameter

          Adjustable spot
          Approx. ø3.5 mm at 100 mm
          Approx. ø9 mm at 250 mm
          Approx. ø18 mm at 500 mm

          Response time

          200 µs/1 ms/10 ms/100 ms/500 ms selectable *1

          Light source

          White LED

          Mutual interference reduction function

          Up to 2 units when alternate frequencies set

          Timer

          OFF/ON delay/OFF delay/One-shot

          Power supply

          Power voltage

          10 to 30 VDC, including 10% ripple (P-P), Class 2 or LPS

          Current consumption

          65 mA or less (without load) at 24 VDC;
          120 mA or less (without load) at 12 VDC *2

          I/O

          Control output

          NPN open collector/PNP open collector selectable
          30 VDC or less, 50 mA or less, remaining voltage: 2 V or less
          N.O./N.C. selectable
          *3

          External input

          Tuning /Transmission OFF selectable
          Short circuit current: 1 mA or less for NPN/2 mA or less for PNP
          For the applied voltage, see the wiring diagrams in the instruction manual.
          For the input times, see the time charts in the instruction manual.
          *3

          Protection circuit

          Protection against reverse power connection, power supply surge, output overcurrent, output surge, and reverse output connection

          Environmental resistance

          Enclosure rating

          IP65/IP67 (IEC60529)

          Ambient light

          Incandescent lamp: 10,000 lux or less, Sunlight: 20,000 lux or less

          Ambient temperature

          -20 to +50 °C (No freezing)

          Relative humidity

          35 to 85 % RH (No condensation)

          Vibration resistance

          10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions

          Shock resistance

          1,000 m/s2, 6 times in each of the X, Y, and Z directions

          Material

          Case: Zinc die cast (Nickel chrome plating),
          Indicator cover: PPSU, Buttons: PES
          Lens cover and display: PMMA (scratch-resistant coating),
          Cable bushing: PBT, Cable: PVC, Spot adjustment dial: Iron (triiron tetraoxide coated)

          Weight

          Approx. 170 g (including cable)

          *1 When alternate frequencies are set, the response time increases by approximately 20%.
          *2 195 mA or less (at 10 V, with load)
          *3 IO-Link: Specification v.1.1/COM2 (38.4 kbps) is supported. The setup file can be downloaded from KEYENCE website (http://www.keyence.com).
          If you are using the product in an environment in which you cannot download files over the Internet, contact your nearest KEYENCE office.

          • For Beginners Sensor Basics Understanding fundamental - Introduction Guide to Sensors
          • Trade Shows and Exhibitions
          • eNews Subscribe

          Sensors